Best color settings for fortnite

Best color settings for fortnite DEFAULT

Fortnite’s in-game settings offer customization options ranging from adjusting the game’s texture quality to changing its color scheme. These settings allow players to find the perfect mix that will enable them to spot enemies better while ensuring stable frames-per-second (FPS) and satisfying visual clarity.

Taking advantage of most in-game settings requires powerful hardware, but it would certainly be impossible to have the upper hand in a build fight without a decent monitor. Not only do gaming monitors come with low response rates, but they also come with their own set of customization settings that allows gamers to adjust colors, brightness, and contrast.

If used well, monitor options can help you even further while spotting enemies and loot. Though there isn’t a particular set of settings that is considered best and works for everyone, there are a couple of rules of thumb that most new gaming monitor owners tend to miss.

Here are the best monitor settings for Fortnite.

Bend the brightness to your will

Monitors usually have satisfying levels of brightness when they’re freshly out of the box. Normal levels can end up being not enough when it gets dark in Fortnite, however. If setting the in-game brightness level to its maximum value (150 percent) doesn’t help you at all, then increasing your monitor’s brightness level is your next best bet.

Take a look at your monitor’s user manual to locate where you can adjust the brightness in your monitor’s console. You can also further tinker your overall brightness levels via your graphics card’s Control Panel and even test out different Digital Vibrance percentages. 

Load into a lobby and try out different brightness settings to identify what gives you the best advantage. 

Having a higher than average brightness level effectively makes it easier to spot enemies and loot. Keep in mind that your room’s lighting also plays an important role here, and excessive monitor brightness can also cause eye-strain after prolonged Fortnite sessions.

Turn off Motion Blur both in-game and through your monitor

Motion Blur can be considered as an eye-candy setting. It makes the games look more realistic by adding small blurring details to most turning animations. Though it may look nice, it makes it significantly harder to notice enemies while you’re on the move.

Turning it off via Fortnite’s settings is only the first step since most modern gaming monitors come with integrated Motion Blur or Blur Reduction settings. These settings introduce input lag, which can make a difference in games like Fortnite where milliseconds can make a difference.

Turn off the black equalizer

Black equalizer used to be a premium feature, but it started to find its way into entry-level gaming monitors. The setting makes black hues more visible, but it reduces the overall quality of the image despite sounding quite useful.

Playing at high levels of brightness also eliminates the need for the black equalizer setting. Turning it on can also cause image flickering in rare situations, so not using it is the best course of action while playing competitive games like Fortnite.

Tinker around with blue light and color temperature settings

Not all monitors come with the same color profiles. Some may require more adjusting than others. If your monitor looks warmer than you’d like, it can be a good idea to turn down its Red color temperature.

If you don’t trust your instincts, the best you can do is to search for a color profile for your monitor that was created for playing Fortnite. Professional players share their color settings as well sometimes, and you can also use the in-game color-blind settings, which they also test out, to make it easier to spot enemies and llamas.

Though blue light settings are recommended to reduce eye-strain, the increased level of warm colors makes it harder to distinguish darker tones from long ranges. Turning it off while playing Fortnite is enough to have a better-looking variety of colors that will help you, especially during the night cycles of the map.

Double-check your refresh rate settings

High refresh rate gaming monitors update the image on your screen faster than standard ones, meaning you’d be able to see someone putting up a wall faster than a 60 Hz monitor owner, even if it’s just milliseconds.

Unlike other peripherals like gaming mice and keyboards, you won’t experience everything your monitor has to offer right after plugging it in. Make sure you set your refresh rate correctly via your graphics card’s Control Panel and Windows Advanced Display Settings.

Some gamers even go through years without realizing they’ve been playing with a 60 Hz refresh rate on their 144 or 240 Hz monitors.

Remember that you’ll also need a powerful enough PC to match your monitor’s refresh rate in terms of FPS, otherwise, you won’t be able to feel the difference. 

Try increasing Sharpness

If you run into a setting called Sharpness on your monitor’s control panel, note down its default value. Naturally, monitors ship with low sharpness levels since texts become difficult to read at higher values. 

It’s the opposite for gaming, however, since increasing Sharpness in most monitor models makes in-game objects and models more distinguishable. Setting it to maximum can also be overkill, so we recommend experimenting with values around 60 to 90 percent (six to nine) sharpness values.

To avoid increasing and decreasing every time you switch between gaming and regular usage, try setting up a profile to make the transition seamless.

Give the preset profiles a chance

Gaming monitors tend to have a bunch of pre-installed profiles that were modified for each game genre. You’ll have color profiles for first-person-shooters, multiplayer online battle arena (MOBA), and even movies.

These profiles aren’t just random settings generated by the developers, though. Most manufacturers sit down with professional gamers and test with different variations to see what they prefer.

If you’d not like to spend so much time on personalizing your monitor settings, then presets can work wonders. You can also fine-tune those settings to fix anything you don’t like about them, like the brightness, and save your changes as a stand-alone profile, which you can use the next time you launch Fortnite.



The colors are different in Fortnite Chapter 2 Season 3.

Things are darker, especially in the night time.

So you may find it harder to see enemies in this new season.

In this guide, you will learn the best brightness and color settings to use to make Fortnite look better and enable you to see enemies clearer.

Turn up your brightness

The easiest way to make Fortnite look less dark is to just turn up your brightness.

The default brightness setting is 100%, but you’re going to want to crank this up to about 130%.

Fortnite in the night time with brightness set to 130%

You could go as high as 150%, which is the maximum. But this could be too bright and further wash out the colors.

Here’s how to adjust your brightness setting in Fortnite:

  1. Open the Fortnite menu by pressing the escape key on your keyboard or start button on your controller
  2. From the dropdown list select Settings
  3. Slide the brightness setting up to your desired number
Adjusting the brightness setting in Fortnite to 130%

Something to bear in mind when setting your brightness in Fortnite is that it’s going to depend on the brightness of your monitor.

I recommend starting at about 130% and then experimenting with higher or lower brightness levels to find what works best for you.

Turn off color blind mode

In Fortnite Chapter 1, using the deuteranope color blind mode enabled you to see better through the storm.

So a lot of players switched to using deuteranope because being able to see enemies through the storm was an advantage.

Then in Chapter 2, the storm was made more transparent so you could see into the storm regardless of the color blind mode you use.

But some pro players continued to use deuteranope because they preferred the colors and felt that it could still give them an advantage.

Now in Chapter 2 Season 3, the deuteranope color blind mode looks much worse and makes the colors look muddier.

Fortnite visuals in Chapter 2 Season 3 with 100% brightness and deuteranope 10

For example, Mongraal has been using deuteranope since Chapter 1, but upon seeing the new colors in Chapter 2 Season 3 he switched his color blind mode off.

I recommend you turn your color blind mode off, or at least turn down the color blind strength, so you can see better in Chapter 2 Season 3.

Of course, if you’re actually color blind then you should use the color blind mode and strength that enables you to see colors clearly and differentiate between colors.

But for most people that aren’t color blind, you will benefit from the better colors with color blind mode off.

Increase post processing

Post processing is one of the graphics quality settings you can adjust if you play Fortnite on a PC.

Increasing the post processing graphics quality setting in Fortnite to Epic

Post processing can further improve the visual quality of images after scenes are loaded in the game.

Usually, I would suggest you set your post processing to low to maximize your frames per second in Fortnite.

But because of the new color settings in Fortnite Chapter 2 Season 3, increasing your post processing to either medium, high, or epic can dramatically improve the quality of colors in the night time.

Fortnite visuals with brightness at 130% and post processing Epic

Of course, increasing your post processing setting is going to reduce your FPS. But I think the slight decrease in FPS is worth it for the noticeable improvement in visuals.

Use these Nvidia color settings

Something you’ll notice with the colors in Chapter 2 Season 3 is that blues are a lot more blended in. This makes it difficult to see enemies that are moving through the water because there isn’t much contrast.

Since the Fortnite map is more than 50% water now, thanks to The Device event, it’s super important that you’re able to see enemies moving through the water

Also, the blending of the blues makes it even harder to see enemies when you’re box fighting. Because the colors of your walls when partially broken are blue, it’s hard to see an enemy as they move around your box.

Using these color settings in your NVIDIA Control Panel will help.

Sorry mobile players, console players, and AMD users, but this tip is only for PC players that use an Nvidia graphics card.

To access the NVIDIA Control Panel you have to right-click on your desktop and then select NVIDIA Control Panel.

Selecting NVIDIA Control Panel from the desktop

Once opened, you want to click on the Adjust desktop color settings under the Display options.

Next, you want to select the primary monitor that you use to play Fortnite as the display you would like to change.

Then select Use NVIDIA settings under choose how color is set.

Now you want to change your color settings to the following:

  • Brightness: +55%
  • Contrast: +55%
  • Gamma: +1.00
  • Digital vibrance: +60%
  • Hue: +0
Nvidia Control Panel color settings for Fortnite with increased brightness, contrast, and digital vibrance

These are the settings that I learned from DestinysJesus.

You definitely want to turn up your digital vibrance because this is the setting that’s going to put more life into colors so they stand out better.

You’ll notice when using these settings that you’ll find it easier to see enemies in the water, track enemies through broken walls, and locate enemies in the storm.

Of course, you can experiment with these settings to find the perfect values for you. These numbers are a good reference to start with.


A lot of things were changed in Fortnite Chapter 2 Season 3.

And many of us are still adapting to all of the changes to the map and the weapons.

So the fact that the colors were dramatically changed may have flown under the radar for most people.

But when you turn up your brightness, turn off color blind mode, increase post processing, and use the Nvidia color settings mentioned in this post, you will notice that it’s easier to see enemies in the night time.

I hope you have found this guide useful and that it’s helped you to optimize your settings to allow you to see enemies better so you can win more of your games.


  1. Your sign for your birthday
  2. 3 16 collection discount code
  3. The mud honeys discount code
  4. 2 tier rolling cart small
  5. Old fashioned movie camera clipart

List Of BEST COLOR BLIND SETTING FORTNITE. Find the right one for you


How do I read more articles from the author who wrote Best Color Blind Setting Fortnite?

If you want to see more articles from the writer of Best Color Blind Setting Fortnite, just scroll to the end of our site then click on “More from author” section. We will show you all the articles from the same author in the result.

Do your website earn a commission when I click on a link in Best Color Blind Setting Fortnite?

We participate in affiliate marketing and may allow third-party affiliate links to be encoded on some of our Digital Services. This means that we may earn a commission when you click on or make purchases via third-party affiliate links in Best Color Blind Setting Fortnite.

Besides Best Color Blind Setting Fortnite, how do I know which is the hottest topic at the moment?

If you want to know which topic is the hottest right now besides Best Color Blind Setting Fortnite, go to our homepage and scroll down a little bit. You will see the “Hot right now” section. We will show you a list of the hottest topics at the moment.

The BEST Colorblind Mode For Chapter 2 Season 8! (BEST SETTINGS)

Fortnite Season 7 FPS Boost Guide: Colorblind mode, Optimal Rendering mode, and more

Epic has recently released Fortnite Season 7 along with the v17.00 update. The new alien-themed season has added a lot of new features to the game.

Gamers are having an amazing time exploring the map, interacting with NPCs, and eliminating enemies to march all the way towards Victory Royale.

Since the new update was released, gamers have complained of a slow system, poor FPS, and low input settings. This article dives into some changes that gamers can implement on their system for better performance while playing Fortnite.

Fortnite Season 7: Optimising the settings for a better output

Loopers have been asking a lot of questions regarding Rendering Mode in Fortnite. Currently, gamers have a handful of options to choose from. While some prefer playing the game with DirectX 11, others prefer the Performance Mode.

DirectX 11 and 12 are mostly similar and offer similar performances. However, the Performance Mode is better than the two and offers an optimized FPS compared to the other.

It is advisable to use the Performance Mode for Fortnite for better FPS and input delays.

Colorblind Mode is another aspect that has confused gamers for some time. Loopers are eager to learn more about this mode and the best settings that need to be implemented for Fortnite.

Players can opt for no Colorblind mode if they can see the map and the storm easily. However, some loopers might have issues differentiating the storm from the safe zone. This is when the Colorblind mode comes into play.

Gamers should select Protanope Colorblind Mode and adjust its strength between 5 and 7. Gamers will be able to see the difference once the settings have been changed. The greens on the map will be a bit darker in this mode, while the blues will be lighter. The contrast between the two will enhance visibility, and gamers will be able to differentiate between the safe zone and the storm easily.

The most popular Colorblind Mode is the Tritanope mode. Gamers selecting this mode should adjust its strength to 10 and reduce the brightness to 50%. This will change the graphical settings considerably, and the map will be a lot more vibrant.

Regarding the resolution settings, gamers are advised to select 1920x1080 settings. In terms of Window Mode, it is best to select the fullscreen mode as it gives a better Fortnite Season 7 FPS boost compared to other modes.

Also Read

Disclaimer: This article reflects the opinions of the writer.


Fortnite for best settings color

Best Fortnite Settings for Maximum FPS and Visibility

Competitive gamers will use everything in their toolbox to gain an advantage over their opponents. Aside from having top-of-the-line hardware, there are many graphics settings, both in-game and out, you can change to improve performance and visibility. In this guide, we’ll look at some of those settings for the most famous battle royale game on the market: Fortnite. Here are the best Fortnite settings for maximum FPS and visibility.

Best Fortnite settings for maximum FPS

Here are the best Fortnite graphics settings for maximum FPS:

Graphics Options

  • Quality Presets: Low
  • 3D Resolution: 100%
  • View Distance: Near
  • Shadows: Off
  • Anti-Aliasing: Off
  • Textures: Medium
  • Effects: Low
  • Post Processing: Low

Advanced Graphics

  • VSync: Off
  • Motion Blur: Off
  • Show FPS: On
  • Rendering Mode: DirectX 11
  • Allow Multithreaded Rendering: On
  • Use GPU Crash Debugging: Off
  • Latency Markers: On
  • Nvidia Reflex Low Latency: On + Boost
  • Latency Flash: Off
  • DLSS: Off

What should you set the Frame Rate Limit to in Fortnite?

What about the Frame Rate Limit? You should set your Frame Rate Limit to the highest stable FPS that your computer can keep. A popular choice for players using high-end computers is 240 FPS. 

If you use FreeSync or NVIDIA G-Sync technology, you will want to limit your FPS to whatever your monitor refresh rate is, minus three. So, if your monitor refresh rate is 144 Hz, you’d want to cap your Frame Rate Limit at 141 FPS. Doing this ensures your FPS will never go to 144 and above, which would cause G-Sync and FreeSync to toggle and cause screen tearing. You can manually set a custom maximum frame rate in the gameusersettings.ini file in the following directory: 

After changing the FrameRateLimit field to your desired setting, change the file to read-only. You can do this by right-clicking the file, going to properties, and checking the read-only box under Attributes on the General tab.

Best Fortnite Settings for Visibility

You can change a few settings to increase your in-game visibility—how easily you can see enemies and objects. We’ll focus on the in-game resolution, as well as color blindness and digital vibrance settings.

What resolution should you use in Fortnite?

Fortnite runs best in fullscreen mode, according to our testing. The in-game tooltip even says that the game will run slightly faster when compared to windowed fullscreen and windowed mode. 

There are a few different resolution options, and many Fortnite professional players prefer a stretched resolution. A popular competitive resolution for Fortnite is 1680×1050. The stretched resolution makes the game appear more zoomed in, which can drastically help your aim and focus. Not only that, but you may also get higher or more stable FPS because of fewer pixels rendering on-screen. 

Best Color Blind Modes in Fortnite

There are three good colorblind modes in Fortnite, which may help visibility even if you are not colorblind:

Tritanope 10

  • Brightness: 50%
  • Color Blind Mode: Tritanope
  • Color Blind Strength: 10

Tritanope 10 is perhaps the most popular option for folks who like to play with a color blind mode. The mode is originally designed for people who have blue-yellow color blindness. It makes colors a lot more vibrant and bright, but we recommend turning down the brightness a bit to compensate.

Protanope 5

  • Brightness: 100%
  • Color Blind Mode: Protanope
  • Color Blind Strength: 5-7

Protanope color blind mode is for people who cannot perceive red light. This colorblind mode makes the storm a bit easier to see.

No Color Blind Mode

  • Brightness: 80%
  • Color Blind Mode: Off
  • Color Blind Strength: 0

If you prefer to play with no color blind mode, we recommend changing your digital vibrance setting on your desktop to compensate. You may also want to turn down your brightness to around 80% for less eye strain.

How to change Digital Vibrance in Fortnite

To change your digital vibrance in Fornite, you need to exit the game and head into your NVIDIA (or AMD) Control Panel. Once inside the NVIDIA Control Panel, navigate to adjust desktop color settings and change Digital Vibrance to 80%. You can experiment to see what percent you like best, but we find 80% to be the sweet spot.

How to change Digital Vibrance in Fortnite

After changing and applying your digital vibrance settings on your desktop, you can launch Fortnite. Load into a game, and you should notice a big difference in the colors. Everything is much more “vibrant,” allowing you to see things like the storm eye zone easily. 

The BEST Colorblind Mode For Chapter 2 Season 7! (BEST COLOR SETTINGS!)

This is the first. The second: I dont need prostitute drivers, and its good. its very good that you dont prostitute Third: I'm not going to fire you.

You will also be interested:

Judy groans, pressing against me as her phallus drops slightly, allowing the girl to slowly pull it out of my frayed hole. Shuddering, I again feel an absolute emptiness that overwhelms me, but this sensation is quickly replaced by moist warmth, when my daughter's sperm. Follows her penis, drooling from my gaping anus to collect between the legs of the kuchins.

1093 1094 1095 1096 1097