Car led light strips exterior

Car led light strips exterior DEFAULT

2020 New 4pcs Rgb Led Car Neon Undercar Exterior Decorative Light Strip Kit By Wireless Remote Contr


4Pcs Car LED Neon Under car Glow Lights Underglow Atmosphere Decorative Bar Lights kit Strip,Led Car Light Underglow Kit RGB Multicolor Neon Underbody 8 Color With Sound Active and Wireless Remote


HIGH BRIGHTNESS LED CHIP - High Intensity 5050 SMD LEDs -- Underglow Lights Kit Strips With the wireless remote to control power switch,The LED music light strip follows the beat and adjusts flashing to fit the strength of the sound.yet also provides elegance inside the car when driving at night.

MULTI-COLOR MODES: - Our Underglow Lights have 8 Preset Static Colors, 2 Preset Jump and 2 Preset Fading Patterns, and 4 Sound Active modes, LEDs Change According to Sound.LED Car Neon Undercar Glow lights Kit Strips also comes with music control mode, makes your car more attractive.

Easy To Install--You don't have to worry about glue falling, configuring the bandage to fix it, it's going to stay stable.Car LED underglow lights kit has the most lights,2 pieces 25 36-LEDs and 2 pieces 37 54-LEDs waterproof LED strips, bright and colorful.

Control Mode--4 Music control mode, 8 signal color control, brightness control, ON/OFF.Using for lighting up the entire under car. Can be Used in a Variety of Interior and Exterior Applications Including all Cars, SUV,Jeep,Vans ,Truck, Boats, Motorcycle, and many other Decorative Purposes.

SAFE & ENERGY SAVING--Car LED light strip has a working voltage of 12V and powered by car charger are equipped with short circuit protection and memory function.Even though they're really bright, they're great power savers so you don't have to worry energy consumption.

Product Specification:

Type: Under Car LED Strip Style: Music Control LED Strip Lights Operating Voltage: 10V-15V Light Color: RGB Multi-Colors Light Source: 5050 LED super bright Flexible and Waterproof: Yes Bulb Type: LED Placement on Vehicl: Front, Rear, Left, Right Length of tub: 2x90CM (36) + 2x60CM (24) Net weight: 11oz(310g)

Package included: 2x 24 inches (60cm) waterproof LED tubes 2x 36 inches (90cm) waterproof LED tubes Wireless RF Control Box Module Wireless Remote Control (Not include Battery.)

Product type: RGB Controlers

Found an error?


Products Car LED Strips | LED Tape Lights for Car Interior and Exterior Lighting

Flexible LED strip lightsdeliver the ultimate in custom lighting that gives your car and vehicle a fantastic ambiance, be it decorative or functional. Easy to bend, shape, cut or extend in the field, and available in a variety of color and lumen package options, LED strips offer unrivaled application flexibility. DIY-friendly, long-lasting and energy efficient, these flexible, ultra-thin lights are increasingly relied on to optimize the ambiance and atmosphere inside vehicles and to provide exterior lighting for increased driving safety and visual appeal. Let your imagination run wild, there's no limit to the creative illumination possibilities afforded by LED strip lights.

LED strips can be used to illuminate every part of your vehicle. Whether you want to bathe your car interior in a soothing glow, set the perfect mood for a romantic and pleasant cruise, or create special effects that rock out to your music rhythm, there's no better way to accomplish these goals than with the use of LED strips. Exterior lighting with LED strip lights adds a new dimension to vehicle styling. The strips can be attached to or integrated into virtually any position around your big rig, truck, car, or UTV to create an eye-catching glow that can give your ride a unique look and safe daytime/nighttime visibility. Make your vehicle stand out from the rest by customizing your headlights, tail tights, turn signals, side running lights, and marker lights. LED strips can also be mounted underneath the body, in the engine bay, around the license plate, behind the grille, and between the bottom of the tailgate and the bumper to provide functional illumination or accent lighting that elevates your vehicle's personality from ordinary to extraordinary.

Car LED strips are typically designed with an operating voltage of 12V direct current. The linear light is comprised of an elongated flexible printed circuit board having two or more electrically conductive traces laminated into a non-conductive substrate. A plurality of LEDs are soldered mounted onto the conductive traces in a mix of parallel and series for constant current designs. The string is a basic unit of an LED strip, it contains one or more LEDs that are connected in series. Typically, a 12V car LED strip is configured with 3 LEDs in series per string. Multiple LED strings is wired in parallel on the strip to create a continuous run of lighting. Since each LED string is an independent and complete circuit, an LED strip lights can be cut between every LED string to create custom lengths. Multiple LED strips can also be joined to create illumination over long runs. The LEDs are arranged in varies pitches. The shorter the pitch, the more uniform the light over the entire run of the strip.

The flexible printed circuit (FPC) of a car LED strip light is typically fabricated using layers of polyimide (PI) which provides the electrically conductive traces with protection and structural integrity. Polyimide is the flexible-circuit dielectric material of choice because it does not exhibit a softening or melting point and can withstand soldering temperatures up to 300°C for a short time. The tough nature and excellent resistance to thermal or chemical damage lend LED strips to applications where a high degree of reliability and immunity to environmental influences is of paramount importance. Wrought or rolled and annealed copper, also known as RA copper, is the material of choice for flexible-circuit conductors. RA copper is much more flexible than electro-deposited copper (ED) copper because the rolling annealing process gives the copper foil a grain structure in the planar direction. Over challenging thermal cycling conditions which are often faced by car LED strip lights, FPCs that use RA copper foils have demonstrated improved resistance to conductor cracking from thermal stress. Car LED strips must be tough enough to withstand the outdoor abuse. The requirement for the LED strip to survive vibration challenges the solder joint reliability. ED copper foils not only have a greater chance of fracturing when bent to a small radium, but are less eligible to handle significant performance demands on the solder joints.

Car LED strip lights are available in many different types that vary in PCB width, LED density, controllability, ingress protection (IP) rating, as well as size, luminous efficacy and color attribute of the LEDs. Higher power or higher density LED strips require the use of heavier copper traces to ensure the current carrying and heat transfer capacity of the FPC. The SMD LEDspopulated on the FPC come diverse color options including warm white, neutral white, cool white, red, blue, green, amber, purple, integrated tunable white and RGB/RGBW/RGBA. Tight binningbased on forward voltage and color points (chromaticity or peak wavelength) remains essential to producing LED strips and lighting installations with high color consistency and uniform illumination. Consistent light intensity all along the strip length also calls for control of the drive current provided to the LEDs, which is accomplished by onboard current limiting resistors or constant current driver ICs. An LED strip light is configured in a way that each LED or string of LEDs is connected in series with a current regulation device.

There are two types of car LED strips, the "analog" type and "digital" type. In analog-type LED strips all LEDs mounted on the controlled circuit will respond to control signals (on/off or dimmingsignals) in the same fashion. These types of products include single color LED strips and non-addressable RGB LED strips. Digital-type LED strips incorporate individually addressable LEDs which are typically multi-chip LED packages (e.g. RGB, RGBW, or RGBA LEDs). These LEDs are embedded with microcontrollers that allow every diode of an LED package to be individually controlled and display different light output—different colors and different brightnesses—on multiple LED packages simultaneously. This level of controllability gives unprecedented flexibility and personalization for color changing and a variety of dynamic effects such as chasing, fading, jumping, flashing, scrolling, etc. Car LED strips can be operated by a wired switch mounted inside your vehicle, a radio frequency (RF) controller that features a wireless remote control, or using an app installed on your iPhone or Android smartphone. Underglow LED strips are often integrated with sound sensors to synchronize lighting with music beat.

LED strip lights designed for car exterior lighting applications must be hermetically sealed against the ingress of water. Typically, exterior mounted LED strip lights are encapsulated in a clear, UV inhibiting silicone casing that is IP67-rated.



  1. Cable news ratings september 2018
  2. Say something easy piano chords
  3. Major tool and machine jobs


  • When buying a high-quality LED light strip, check if it is easy to install and fits your car. Some light strips have a steep learning curve.
  • If you want to avoid trouble with police officers on the road, then only buy LED light strips that your state has approved for use in vehicles.
  • Some LED light strips don’t perform well in extreme weather. Therefore, you should check that the light strip is weather resistant before placing your order.


Q: Why do I need an LED light strip for my vehicle?

A: An LED light strip adds more style to your car. It also makes you visible on the road, thereby reducing the risk of accidents.

Q: How long does a standard LED light strip last?

A: This will depend on the model of the LED light strip you purchase. Some of the best products in the market will last three years, which is an equivalent of 30,000 hours.

Q: Can I install an LED light strip by myself?

A: Yes. However, you may want to reach out to a professional for help with the installation. If you do want to install the light strips by yourself, then select a product with an easy setup.

Final Thoughts

When shopping for a quality LED Light Strip for your car, you want to pick one that provides all the essential features. We recommend the OPT7 Single Row Aura 4pc Auto Interior Lighting LED Strip as our best overall.

If you want to save a little money, then check out our best value pick, the MICTUNING White LED Cargo Truck Bed Light Strip. It comes with all the essential features you need while still saving you some bucks.

How To Install Underglow On Your Car

Are you a big fan of those stylish racing cars that perk up the streets at night? Fascinated by the fabulous appearance the dazzling LED lights bring about in the other cars? Well, now you can do it too! And guess what? Installing LED strip lights and underflows is so cheap that it costs you ever lesser than a pair of sneakers! All you need is a lot of patience and enthusiasm for creating something new and the right machinery that will help you out all the way through.

These lights are bright enough for helping on the road and bring out a certain vibe depending on which color you are choosing. Whether it is a single-colored LED light, you’re referring to or multiple red, green, blue-colored lights–the process stands the same for securing LED strips on the edges of your car and wiring them up to your car’s engine bay.

Disclaimer: Many states and counties across the US have prohibited the usage of aftermarket lighting and consider it as illegal. We are not encouraging anyone to go against the laws. If you’re keen on this, please check out the local laws first before carrying it out.

Installing steps for car exterior led lights

Before you start the installation, make sure you have a washcloth to wipe off any kind of dirt or mud gently, otherwise, your brand-new LED strips might end up getting dirty even before the test drive! It will be wonderful if you possess a hydraulic jack since it will be one of the handiest things in this case. By using it, you can gain better access and more space to work on the underside of your car by jacking it upwards. It is not mandatory to have it, though. You can still proceed with the installation.

Things You’ll Need:

1. LED Strip Light
2. Zip-ties
3. Double-sided tape
4. Extension wires
5. Wire cutter/stripper
6. Hydraulic jack (optional)
7. Washcloth

How to Install Led Lights in Car Exterior

STEP 1: Using the Zip-Ties

Check if the underside of your vehicle has enough space to safely and neatly attaching the LED strips. This also includes the brackets, bolts, or any small openings. Place the strip underneath your car at first, then securely attach it using the zip-ties.

It is best to use zip-ties for every 12 inches of the strip because it is much safer than using double-sided tapes only. Double-sided tapes can mount and hold the LED strip for a temporary amount of time until you figure out ways to use the zip-ties to set securely the strip. If you don’t have a double-sided tape roll, just in case, then make sure there is another pair of hands to hold the strip for you while you neatly fasten the strip.

STEP 2: Connect the Wires to Module Box

Take up the 4 wires and extend them before routing them up to the engine bay. Connect the wires to the module box. You can use some extension cables if the wiring of the LED strip is not long enough to go all the way to the front of the car. Usually, the package contains extension wires, but you may use some from your own if it’s unavailable or not enough.

STEP 3: Check the Installation Sheet or Booklet

Tap the Red wire to the positive end of the battery and the Black wire to the negative end or ground. Check the installation sheet or booklet that provided with the package to see what it’s used for.

STEP 4: Place in the Module Box

Be careful while placing the module box. It should be away from the engine but close to the battery to avoid any form of damage or accident. The place where the module box shall place is to remain dry at all times to avoid electrocution. It models the battery location to remain dry all the time, hence you won’t have to worry about having a damaged module box. Extend the antenna to get a better reception from the module box, even when the hood shut.

STEP 5: Test It and Make Sure

Turn on your car to test it and make sure that everything works. Since the installation is simple, if followed step by step, you can easily set it up yourself and enjoy owning and driving the coolest car in your neighborhood.

Cautionary Measures:

1. Keep underflow “under”–Many drivers prefer to show off and often forget that the basic idea is to mold the car’s exterior, causing no inconveniences while driving; be it for the driver himself or the others. Make sure that the underflow of the strip lights remains in the car’s domain and does not affect the surroundings.

2. Do NOT use flashing lights–Many states have strict and specific codes regarding the usage of light modifications. We reserve flashing lights for law enforcement vehicles, fire department vehicles, and ambulances.

3. Do NOT use restricted colors–Depending on which state you are traveling to or driving in the streets of, you ought to be careful of the regulations. Not every state permits every color. For example, some states strictly prohibit the usage of red, blue, or green-colored aftermarket modifications because they’re reserved for emergency vehicles. Again, some states are lenient and don’t consider it as a legal offense unless the lights are too flashy or are causing inconvenience.

4. Always disconnect- the negative cable of the battery before working on an installation that requires electrical auto parts. Even a small LED strip has connections to the power source that may cause severe levels of electrocution.


LED lights function via providing a platform for the Light-Emitting Diode through the frame it mounts the strip lights on. If the contact between your vehicle’s body and the frame is not enough, or if you are doubtful about it, you can use 16-gauge wire to make a ground wire and then attach it near the frame of the strip lights. Run the wire to a bolt of the frame of your vehicle.

May Love to read the relevant topics


Exterior light car led strips

Your Guide To Car Exterior LED Lighting

Car exterior LED lighting can include LED headlights, cornering lights, taillights, and turn signals. You can purchase a car that comes with LED lighting or add it to your vehicle aftermarket.

What Is Car Exterior LED Lighting?

Car exterior LED lighting is lighting that uses a semiconductor to emit light instead of a light bulb. The semiconductor generates light when a current passes through it. There are many benefits to equipping your car with LED lighting. These include:

  • Lifespan - LED lights have a longer lifespan than conventional lighting. The typical LED light can produce 15,000 hours of light, while a halogen light only gives you 1,000 hours. LED lights cost more, but you don't have to replace them as often as you do conventional lights.
  • Safety - LED headlights produce a longer and wider beam than conventional headlights, allowing you to see farther when it's dark outside. They're also less likely to blind other drivers because they don't produce a glare like halogen lights or high-intensity lights.
  • Immediacy - Halogens and high-intensity lights can take time to reach full brightness, so other drivers might not immediately see them. However, LED lights brighten as soon as you activate them. For example, if you have LED brake lights, the driver behind you will see them as soon as you apply the brakes.
  • Energy Efficiency - LED lights produce more light than conventional lighting while consuming less energy. This lower consumption means that they don't drain your car's battery like halogen lights.

Types of Car Exterior LED Lighting

There are several types of exterior LED lighting that you can put on your car.

LED Headlights

LED headlights last longer than conventional lighting, produce a wider and longer beam of light, and don't produce a glare. Many LED headlights are adaptive, meaning that they can adjust to curvy roads, corners, and traffic conditions, giving you more light when and where you need it. While halogen headlights tend to only come in white or yellow, LED headlights are available in a variety of colors.

LED Taillights

Like LED headlights, LED taillights produce more light while consuming less energy. They're more visible to other drivers than conventional lights.

LED Turn Signal Lights

LED turn signal lights are more visible to other drivers when you engage your turn signal. They typically last for up to 50,000 hours.

LED Fog Lights

LED fog lights deliver a sharper beam of light than conventional headlights. They're available in a variety of shapes and sizes, so you can choose the ones that compliment your car's headlights.

LED Accessory Lights

In addition to safety lights, you can add all sorts of LED accessory lights, such as underbody lights, light strips, and tubes. These come in a variety of colors and are an easy way to customize your vehicle.

How To Choose Car Exterior LED Lighting

When choosing LED lights for your car, there are several factors to consider, including:

  • Cost - Before you start shopping for exterior LED lighting, figure out how much you want to spend. If you plan on having a professional install your lights, be sure to factor in the cost of labor.
  • Make/Model - When you're ready to start shopping for aftermarket exterior LED lighting, begin by finding out what's available for your specific make, model, and model year car. Different vehicles have specific wiring systems, so lights are not one size fits all.
  • Design - While LED lights are available in various colors, many states require headlights to be white or yellow, while brake lights have to be red. Consult your state's Department of Public Safety website or Department of Motor Vehicles website to see if your state has any restrictions. Some states also have restrictions on what type of underbody lights you can put on your car.
  • Your Driving Needs - If you frequently drive on curvy roads, curve-adaptive LED lights are a worthwhile investment. Consider adding LED fog lights if you live in an area where it's often foggy.

How To Replace/Install Car Exterior LED Lighting

Disclaimer: The guidelines in this story are general and not meant to replace instructions for your specific vehicle. Please consult your owner’s manual or repair guide before attempting repairs.

Once you've decided which LED lights you want to add to your car, you'll need to install them.

Remove the Bumper Cover

To install LED headlights and fog lights, you'll need to remove your car's bumper cover. You can typically perform this task with a flathead screwdriver and socket wrench. You can consult your owner's manual to see if you need additional tools. Once you remove the cover, you can access the anchor points for the headlight assembly. If you're installing LED taillights, you can access the assembly through the trunk. You may have to remove a panel, depending on what kind of car you own.

Unbolt the Assembly

You might have to remove your car's front grille section to access the front-end light assembly. Once you've removed any components that are in your way, you can unbolt the assembly. You should only need your flathead screwdriver and socket wrench for this task, but check your owner's manual just to be sure. The same tools should work for unbolting the taillight assembly. When unbolting either assembly, you should slide it away from the vehicle as gently as possible because it's attached to delicate electrical wiring.

Disconnect the Wiring

Make sure that the assembly is pulled out far enough to give you a clear view of the electrical wiring. Depending on your car, the wiring may disconnect simply by squeezing the edges of the connectors. If the connectors are held in place by locking clips, your owner's manual will tell you how to remove them.

Connect the New Exterior LED Lighting

If you're switching conventional lighting for LED lighting, you'll notice that your new lights have extra wires. Your owner's manual will indicate which connectors each wire should plug into. After you know which wires go where, remove an inch of insulation from each wire with a wire stripper. Then connect the "power" wires to the light circuit and the "ground" wires to whatever ground point is most convenient.

Test the New LED Lighting

When installing LED headlights, you'll want to test them and make sure they're aimed in the right direction before you bolt them back into place. After you're sure that everything is working correctly, you can bolt them back into place and put the grille and bumper cover back on. If you're installing taillights, you'll want to test them too before securing them in place.

Where To Buy Car Exterior LED Lighting

SEALIGHT 9005/HB3 9006/HB4 LED 14000LM LED Bulbs Combo Package CSP Chips 6000K Cool White


Alla Lighting 899 880 LED Fog Lights Bulbs Newest 3000lm Extreme Super Bright 12V 892 886 PG13 Replacement




OPT7 Aura Aluminum Underglow LED Lighting Kit for Cars w/Wireless Remote, Exterior Neon Accent Underbody Strips, Multi-Color n Mode, Waterproof, Soundsync, Aluminum Casing, Door Assist, Smart LED, 4pc


AUXITO White and Amber Dual Color Switchback 3157 3155 3457 4157 LED Bulbs with Projector 3030 Chipsets for Car Turn Signal Lights Parking Lights, (Pack of 2)


XT AUTO 8pcs 12V Super Bright 30cm 15 LED Flexible Waterproof LED Strip light For Car Interior & Exterior Decoration DRL Day Running Light Or Boat Bus Garden


LEDCARE Car Headlight Surface Strip Tube Light, RGB Multi Color 24 Inch Flexible Waterproof LED Daytime Running Light Strip Neon Turn Signal Lights Switchback Light (APP Control) 2-Pack



ALLA Lighting H8 H11 Switchback LED Fog Lights, DRL Bulbs 6000K Xenon White/3000K Amber Yellow Dual Color Upgrade H16, Xtreme Super Bright 5200 Lumens Replacement




This content is created and maintained by a third party, and imported onto this page to help users provide their email addresses. You may be able to find more information about this and similar content at

How To Install Underglow On Your Car

From gamers to DIYer looking to brighten up a walk-in closet, LED strip lights are an inexpensive, easy way to liven up—or generally improve—spaces where you spend a lot of time. There are smart options that dim and are ideal for laid-back living rooms, waterproof sets for decks, patios, and pools, and ones with tricked-out features, like colors that change to the beat of music (hello, summer 2021 rooftop dance parties). Whatever your purpose or intention, installing them is the kind of project you can bang out in a weekend, so read on for our top recommendations.

What to Consider

There are countless ways to get creative with LED strip lights, but the first thing to consider is an easy one: if you’re planning to use them outdoors—for a deck, patio, or around a pool—make sure to buy a set that’s waterproof, with an IP-67 rating. Related, finding the right set of LED strip lights for you largely depends on where it's going. If you’re a gamer, want to jazz up your car’s interior, or throw a disco dance party, there are sets geared toward those purposes. There are also LED growing light sets for greenhouses and options for lighting up your general living space.

Sets are typically sold in reels, installed with double tape or adhesive backings and clips, and are generally battery powered or corded. On a more granular level, you’ll want to look out for the number of bulbs per strip and the brightness level, expressed in kelvin, which is abbreviated with a “K.” Finally, light sets are often dimmable and controlled via remote or via Bluetooth with an app.

How We Chose

Our selection includes LED strip light sets with average reviewer ratings of four stars or higher, and the majority are 4.5 stars or more. We focused on options to suit a range of activities and projects, as mentioned above, and highlighted the most notable features for every set we cover, including ease of installation and bulb life, extras like remote controls, plus the number of colors and modes offered.

Advertisement - Continue Reading Below


Our Value Pick

Bozzon LED Strip Lights


For roughly $29 at the time of this writing, you get more than 65 feet of smart LED strip lighting. Use it for everything from illuminating your bedroom with more than a dozen multicolor lights to throwing a living room dance party where lights sync in time with the music. 

The dimmable set includes two easy-to-install 32.8-foot reels, an AC power adapter, and an infrared remote control with more than 40 modes, plus a Bluetooth controller with a mic. Adhesive tape and clips are included for installation. Everything is controlled via app, including setting timers and on/off modes. 


Best for Outdoor Use

HitLights Waterproof LED Strip Lights



If you’re planning to use LED strips outdoors—around your deck, patio, or pool, for example—you’ll definitely want a set with a waterproof rating of IP-67. This set fits the bill, featuring more than 16 feet of 600 warm white dimmable LED lights that are UL-listed certified with a 12-volt DC power source. There’s an adhesive backing and you can cut the strip to customize for your space, plus they come with a 2-year warranty and are said to have a 60,000-hour-plus lifespan.


Best for Car Interiors

Shynerk Car LED Strip Lights



For anyone who wants to trick out their ride neon hues, this LED strip light set is an excellent choice. It’s specifically made for vehicle interiors, with two adhesive-backed power lines for covering both driver and passenger sides. 

Control lights using a remote control or your smartphone via app, with a voice control option, with eight fixed colors and a bevy of customized colors you can create through the app. 

Program lights to adjust to the beat of tunes with multiple modes, including strobe, flash, or fade. This set is a customer favorite, too, with an average of 4.7 stars from more than 3,600 reviewers. 


Best For Gaming

KontrolFreek Gaming LED Strip Lights



Maximize the intensity of your gaming experience with this LED strip light set from KontrolFreek. It features six multicolored light strips, along with five connectors, for a total of nine feet of coverage—powered by a USB-charged controller. 

You can customize your favorite combos, choosing from 20 colors, 20 effects, eight brightness levels, and eight speeds. The set has a 3M adhesive backing to attach to your PC, console, walls, and more in a snap. Another plus is that the strip is super-flexible, so you won’t have issues wrapping it around corners. 


Best for Televisions

Pangton Villa LED Strip Lights


This set is ideal for anyone who simply wants a TV backlight with some fun color options, rather than an over-the-top multicolor entertainment center experience. At an ultra-reasonable price of under $12 at the time of this writing, that’s just what you’ll get. String the adhesive-backed light set behind your flatscreen (it comes in two lengths) for TVs from 40 to 60 inches. 

There are 16 color-changing options plus a dimmable mode, all of which is controlled via the included remote at a distance of up to roughly 26 feet away.


Best for Dance Parties

Micomlan Music Sync LED Strip Lights



If there’s a DJ dance party in your future, this is your best bet. It boasts 82 feet of multicolor LED lights that pulse and change to the beat of the music, controlled via app using Bluetooth. The app features a whopping 16 million color options and 22 light style modes, plus there’s a built-in mic for TikTok sessions and an infrared remote control, which can be used from up to 20 feet away. The strip has an adhesive backing and can be cut to customize lighting for your space, and it’s said to have a 50,000-hour lifespan. 


Best for Greenhouses

Barrina Grow LED Strip Lights



On the calmer side of reasons for using LED lights, this full-spectrum, LED strip light set is specifically made for greenhouses. 

It comes with eight pieces and installation couldn’t be easier: Secure each 2-foot strip to the surface above plants using provided double-sided tape, installation clips, and connector cords, then run the cable to an outlet. Up to 16 strips can be linked in a series, plus each light has an on/off switch, so they can be controlled separately or together.


Best for Bedrooms

Govee LED Strip Lights with Remote


Sure, you may have a sunrise alarm clock with calming mood lighting, but for truly bathing your room in colorific splendor, a multicolor LED light set is in order. Customers rave about this set, which gets an average 4.7 stars from more than 55,800 reviewers. 

The set has 300 lights and features more than 16 colors, plus six customizable colors so you can get creative and six brightness levels, all controlled via an included remote. Installation is no more difficult than sticking the adhesive backing to your walls. 

The light  is said to deliver 50,000 hours of life and is also available in a 16-foot-long option.


Best for General Home Projects

Govee Dimmable LED Strip Lights


Use this set of LED strip lights for a wide range of home lighting projects including brightening up closets, dark vaulted ceilings, or kitchen cabinets and shelving. The 16-foot strip offers 300 ultra-bright lights and six dimming levels, operated via the included control box. 

The strip is considerably flexible, which is why it’s such a versatile choice for a range of home lighting projects. There’s an adhesive backing for easy installation and it’s available in bright or warm white for similar price points—about $14—at the time of this writing. 

Rachel KleinRachel KleinRachel Klein has been a professional editor and writer for more than a decade, with a background in digital media, publishing, and journalism.

This content is created and maintained by a third party, and imported onto this page to help users provide their email addresses. You may be able to find more information about this and similar content at


Similar news:

Introduction: How to Install Car LED Strip Lights

Have you seen anyone sport a set of LED Underbody car lights? Whether or not you choose to install the single colored LED strip or the multi-colored RGB LED strip is all based on personal preference, but here is a guide to go through the installation process. The concept is straightforward as you will be securing the LED strips along the out edges of your car and extending the wires up to the engine bay.

Before you proceed with the first step, be sure to use a washcloth to gently remove any dirt or mud so your LED strips won't be dirty. If you have a hydraulic jack, now is a great time to utilize it since you can jack up the car for more access to the underside of the vehicle. If you don't have a hydraulic jack, that won't be an issue. You can still proceed with the installation.

Step 1:

Set the LED strip underneath your vehicle. Now is a good time to see if the underside of your car has any way of securely attaching the LED strips, including bolts, brackets or other small openings. Secure the LED strip with zip-ties.

We recommend zip-ties for every 12 inches of the LED strip, since double-sided tape may not be strong enough to securely attach the strip indefinitely. It helps if you have a friend to help you hold the LED strip in place during the attachment process, but if not you can just use the double-sided tape to temporarily mount the LED strip in place before you permanently secure it with zip ties.

Step 2:

Extend the wires. Route the 4 wires up to the engine bay and connect them to the module box. If the wiring of the LED strip on the rear bumper is not long enough to reach the front of the vehicle, you may use the extension wires that come with the package.

Step 3:

Tap the Red wire to battery positive/Black wire to negative or ground. If there is an optional wire, check the installation sheet to see what it's for.

These diagrams demonstrate where the LED strips are located in the car, in relation to their wiring.

Step 4:

Place the module box close to the battery, but away from the engine so there is no risk of damage. Make sure the location you place the module box at will be dry at all times. The battery/fuse box location is designed to stay perfectly dry so you don't have to worry about damaging the module box. Extend the antenna on the module box so you can get better reception even if the hood is closed.

Step 5:

Test to make sure everything works and enjoy your set of underbody LED strips. You can see that the installation was pretty straightforward so you will be well on your way to being the coolest and most colorful car on the block.

Be the First to Share

Did you make this project? Share it with us!


  • Home Cooked Speed Challenge

    Home Cooked Speed Challenge
  • 3D Printed Student Design Challenge

    3D Printed Student Design Challenge
  • Sewing Challenge

    Sewing Challenge

1280 1281 1282 1283 1284