Gx470 rock sliders bolt on

Gx470 rock sliders bolt on DEFAULT

Admin

 
bulldog's Avatar
 

Join Date: May 2005

Location: Walnut Creek, CA

Posts: 12,341

Default

DO you have access to a local fabber? Or are you handy with metal work?

What I would suggest is to check with Lexwoody (he is getting weld on sliders) to see what sliders look like on the GX. Then order a set of 4Runner bolt on sliders with no paint. Shrockworks make a good set. Fit these to GX and see what happens. If any changes need to be made, you can have it done by the local fabber.

Once it fits nicely send it to get powdercoated and you are done.

The reason why I suggest you buy a pre build bolt on set, is that will probably be much cheaper in the end that paying a fabber to design and build something from scratch.

__________________
andries
K9BDG

2019 Low Rider
2021 Poser
Sours: http://www.toyota120.com/forum/showthread.php?t=6483

RCI 2003- Current 4Runner/GX470/GX460 Rock Sliders

**Please note this item will ship from the manufacturer-LEAD times vary-contact us before placing your order and we will check current estimated lead time**

The rocker panel is the most vulnerable area on your vehicle when off-road, as well as one of the most costly to repair. Protect your investment with a pair of RCI heavy duty rock sliders.

RCI sliders utilize a full frame support mounting plate which serves both to protect your frame from damage, as well as provides an extremely rigid attachment for the sliders by using multiple bolt locations all across the frame. These will help protect the truck both off-road as well as in the parking lot, and are still very functional as a step if needed.

KEY FEATURES

  • Protects rocker panels and doors
  • Our sliders utilize a 2" square main tube which is far stronger than 1.75" round tube used by competitors
  • Fully gusseted on all four legs
  • 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won't hang up
  • Full length 3/16" frame plate and THREE leg design guarantee a slider as strong or stronger than anything on the market
  • Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
  • 20 degree upward angle creates a low profile that with maximum ground clearance, while remaining usable as a step
  • Direct bolt on addition to existing mounting locations, no drilling required
  • Available tread plate for top surface
  • Easy install with only basic hand tools
  • All hardware and installation instructions provided
  • Now standard with our signature low profile rear kickout

PRODUCT SPECIFICATIONS

  • Material: 11ga tubing with 3/16" heavy duty frame plates
  • Weight: approx. 45 lbs. per side
  • Finish: Powdercoated Black

MADE IN USA- Lead time may apply during high volume times of the year.

Sours: https://www.apexoverland.com/shop-by-brand/RCI-2003-Current-4Runner-GX470-GX460-Rock-Sliders-p70147148
  1. Where does cooper webb live
  2. Ram 1500 oem backup camera
  3. French country chair with ottoman
  4. Best small cap investors

RCI Rock Sliders | 03-09 4Runner / GX 470

  • Protects rocker panels and doors
  • Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
  • 1.75″ DOM outer rails are now standard for uncompromised strength
  • Heavy duty 1/4″ gussets on all legs
  • 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
  • Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
  • Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
  • 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
  • Direct bolt on addition to existing mounting locations, no drilling required
  • Easy install with only basic hand tools
  • Grade 8 hardware and installation instructions provided
  • Standard with our signature low profile rear kickout
  • *Does not fit KDSS models of GX470, unless you remove KDSS system from frame
  • Made in USA
  • This item is made to order, allow 4-8 weeks production time prior to shipping

In Stock

Description

DETAILS

The rocker panel is the most vulnerable area on your vehicle when off-road, as well as one of the most costly to repair. Protect your investment with a pair of RCI heavy duty rock sliders.

RCI sliders utilize a full frame support mounting plate which serves both to protect your frame from damage, as well as provides an extremely rigid attachment for the sliders by using multiple bolt locations all across the frame. These will help protect the truck both off-road as well as in the parking lot, and are still very functional as a step if needed.

 

KEY FEATURES

  • Protects rocker panels and doors
  • Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
  • 1.75″ DOM outer tubing is now standard for uncompromised strength
  • Heavy Duty 1/4″ gussets on all legs
  • 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
  • Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
  • Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
  • 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
  • Direct bolt on addition to existing mounting locations, no drilling required
  • Available tread plate for for use as a step
  • Easy install with only basic hand tools
  • Available with our heavy duty black textured powdercoat finish, plus we take it a step further and coat all rock sliders with an epoxy primer for an exponentially more durable finish than competitors. We now powder coat in-house allowing us to provide better quality, and shorter lead times for the same cost!
  • All hardware and installation instructions provided
  • Fits 2003-2009 4runners without Xreas (Xreas model available by special request, call for details)
  • Includes our signature low profile rear kick-out standard
  • *Also fits 03-09 GX470, however it will require removing the factory steps / trim below the body pinch seam
  • *Does not fit KDSS models of GX470

Related products

    Sours: https://exitoffroad.com/product/rci-rock-sliders-4th-gen-4runner-gx470/
    Lexus GX470: Rock Sliders By White Knuckle Off Road Install!

    GET AN INSTALLATION QUOTE

    The 120 and 150 series both have numerous weld nuts mounted to the frame, which allow accessories to be directly attached to the frame. The 150 series (2010 and up SUV models) have roughly 10 holes per side. The 120 series has less, but does share a few common holes that still line up. We decided to get creative and use what holes we could, then use riv-nuts to make up the difference and add clamping area. If you’re not familiar with riv-nuts, they are great for adding threads to blind holes in body sheet metal or boxed frames. With a flanged head, serrated wall on the outer barrel and threads at the tip, once the riv-nut is inserted a bolt of the proper size can be used to start torquing the insert down. As the barrel is torqued, it starts collapsing and clamps itself to the frame. When properly installed they can be quite strong, in fact most Jeep body shell armor for rockers and fenders uses riv-nuts. We’ve found, the best ‘tool’ is simply an appropriate length bolt, a nut one size larger, a serrated washer between the riv-nut and larger nut, and a flat washer between the bolt head and larger nut. In this case, we had a specific tool left over from another kit which worked even better. While, riv-nuts may sound like a cut-rate solution, keep in mind that a single M8 riv-nut has roughly 8kN of shear strength and 10kN of tensile strength; with 11 bolts per side, we feel more than secure for the use this vehicle will see.. The finishing touches for this upgrade come in the form of paint matched powder coating on the sliders, careful trimming of the factory running board shells to retain a stealth look, and some small LED lights purchased off Amazon wired into the orignal factory step board wiring circuit. Not only did this one simple upgrade add tons of protection to the vulnerable rockers, we kept all the factory functionality while improving the aesthetics of the rig to boot.

    Sours: https://www.polyperformancegarage.com/2020/02/15/2005_lexus_gx-470_all_pro_apex_rock_sliders/

    Sliders on rock gx470 bolt

    Rock Sliders | 03-09 4Runner / GX 470

    Description

    DETAILS

    The rocker panel is the most vulnerable area on your vehicle when off-road, as well as one of the most costly to repair. Protect your investment with a pair of RCI heavy duty rock sliders.

    RCI sliders utilize a full frame support mounting plate which serves both to protect your frame from damage, as well as provides an extremely rigid attachment for the sliders by using multiple bolt locations all across the frame. These will help protect the truck both off-road as well as in the parking lot, and are still functional as a step if needed.

     

    KEY FEATURES

    • Protects rocker panels and doors
    • Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
    • 1.75″ DOM outer tubing is now standard for uncompromised strength
    • Heavy Duty 1/4″ gussets on all legs
    • 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
    • Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
    • Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
    • 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
    • Direct bolt on addition to existing mounting locations, no drilling required
    • Available tread plate for for use as a step
    • Easy install with only basic hand tools
    • Available with our heavy duty black textured powdercoat finish, plus we take it a step further and coat all rock sliders with an epoxy primer for an exponentially more durable finish than competitors. We now powder coat in-house allowing us to provide better quality, and shorter lead times for the same cost!
    • All hardware provided
    • Fits 2003-2009 4runners without Xreas (Xreas model available by special request, call for details)
    • Includes our signature low profile rear kick-out standard

    *Also fits 03-09 GX470, however it will require removing the factory steps / trim below the body pinch seam

    **Does not fit KDSS models of GX470

    **Please see our “Current Lead Times” tab for the most up to date information! 

    WEIGHT: 50-55 lbs. per  side

    MADE IN USA

     

     

    Comparison of standard Hot Roll Electric Welded (HREW) steel tubing vs. Drawn Over Mandrel (DOM) tubing. 

    Tubing Type

    HREW

    Yeild Strength (PSI)

    48,000*

    Ultimate Strength (PSI)

    65,000*

      
    DOM72,900 **82,300 **

    *Approximate mechanical specs for engineering design, may vary slightly depending manufacturer.

    **Certified specs provided by RCI Offroads DOM supplier

    Additional information

    Top Tread Plate

    No Top Tread Plate, Add Top Tread Plate

    Finish

    Bare Metal, Satin Black Powdercoat

    Sours: https://rcimetalworks.com/https:/rcimetalworks.com/03-09-4runner-rock-sliders/
    Rock Sliders Install on Lexus GX470 \u0026 4Runner - RRW V3 Bolt-on Rock Sliders

    You will keep my dick when I write. You will do all this with great desire and happiness. And then no one will ever see these photos. Now I want to know right away, do you agree.

    Now discussing:

    Me a reprieve. In the end, they set a date by which I needed to close the debt, otherwise they would evict me. Can't say the timing was realistic with my income level. But they mysteriously hinted that they might find a way how I could pay off this debt. If I knew what was on their minds.



    1433 1434 1435 1436 1437