Hyalite canyon hiking trail map

Hyalite canyon hiking trail map DEFAULT
Hyalite Creek_Wide

 Trail Difficulty – Advanced

Trail Length – 11.62 miles

Trail Time Share – Yes

Ride Type:  Out & Back

Ascent – 2011 ft.

Descent – 1959 ft.

Min Elevation – 6932 ft.

Max Elevation – 8851 ft.


High Resolution Topo Maps

Hyalite Creek_2D

Hyalite Creek_3D_1

Hyalite Creek_3D_2

Hyalite Creek_3D_3


Hyalite Creek_1 Justin HardineAnother gem of a trail for the rider seeking a very technical, challenging trail!  The trail begins as a vehicle width path but quickly narrows once you reach the single track (MTB & Hiking) trail turnoff (.4 miles from the trailhead, go left at the junction).  The trail gets right down to business with technichal climbs and mini rock gardens, as it parallels Hyalite Creek path for another ½ mile before joining together again to become one trail.  As you ascendHyalite Lake_3 Justin Hardine through beautiful forests and a multitude of creek crossings one thing will remain constant, the trails unyielding grade and difficulty.  Just a very consistent and challenging climb.  As you ascend, take the time to stop and check out a couple of the waterfalls and spectacular views of the valley below.  Hyalite Lake is a remote lake 5.85 miles up from the trailhead that boosts an incredible level of solace and beauty.  You can continue to the top of Hyalite Peak, but riders beware, there will be sections of hike-a-bike throughout the next 2 miles on your way to the top.  Wherever you decide to turn around, be prepared for some super fun technical downhill. Keep in mind that this is a tight downhill with a high probability of encountering hikers, other riders, stock users, etc.  Be alert for uphill travelers and give them the right-a-way.


Time Share Trail – More information on timeshare click here.

The trail is open to mountain bikers with timeshare restrictions from July 16th – September 4.


Driving Directions:

            Departing from Bozeman, drive west on Main Street and take a left (south) on 19th.  Continue to drive on 19th Street headed south and west out of town for approximately 7 miles until you reach the turn to Hyalite Canyon.  Make a left-hand turn onto Hyalite Canyon Road and continue past Hyalite Reservoir; when the road splits, take the right fork toward Hyalite Creek trailhead. Continue for approximately 2 miles to the end of the road and the trailhead parking lot.


Google Maps Driving Directions (IOS and Android compatible) 

Sours: https://www.mtbtrailmaps.com/mtb-trails/trails/bozeman-mt/hyalite-creek/

Trail Guide to Hyalite Peak, Bozeman, MT

Skip to Main ContentSkip to Navigation

By Tom Beers and Tyson Berndt, geology majors, Department of Earth Sciences, Montana State University

"Keep your sense of proportion by regularly, preferably daily, visiting the natural world." -- Catlin Matthews

A view of Hyalite Canyon looking to the north. This U-shaped valley is a tell-tale sign of past glaciation. Photo by Tyson Berndt.


The Hyalite Peak Trail is located just south of Bozeman, Montana in the heart of the Gallatin Mountains. The Gallatin Range is comprised of Archean metamorphics, Paleozoic and Mesozoic sedimentary rocks, and Eocene volcanics.This trail traverses approximately 8 miles over some of the most unique and interesting terrain that Montana has to offer. The Hyalite trail itself is concentrated in an area that was once subjected to a rich and violent volcanic past. While trekking through the forest, many signs of this ancient environment can be seen in the form of columnar jointing, debris flows, and volcanic rocks. Aside from volcanics, geomorphologic features are also abundant. Previous glacial activity has removed hundreds of thousands of cubic meters of rock to the Gallatin Valley below and, because of this scouring of the landscape, we are rewarded with an ample supply of waterfalls, sinuous canyons, and steep cliffs.

This is a view to the west of the Gallatin Range as seen from Paradise Valley. Photoby Tyson Berndt.

Traveling to Hyalite

The Hyalite area is just 30 minutes from Bozeman and is open year round, but the best time for viewing the local geology begins in late spring. If a trip to the summit of Hyalite Peak is on the itinerary, visiting in mid to late summer is recommended. From Bozeman, travel south on 19th street for approximately 7 miles and then turn left onto Hyalite Canyon Road. Once you have turned, it is 9.5 miles to Hyalite Reservoir and another 3.5 miles to the trailhead. As you travel up the canyon, be sure to keep an eye out for exposed Archean gneiss as well as the Flathead Sandstone, Wolsey Shale, and Meagher Limestone. View this map for directions to the Hyalite Peak trailhead(Acrobat (PDF) 1.3MB Nov18 09).

Step by Step Trail Guide

Hyalite Canyon Google

This a view looking to the south, up Hyalite Canyon. Image prepared using GoogleEarth.

Hyalite Peak Google

This is a view to the south/southwest, which shows the lake and its location relevant to the peak. Image prepared using GoogleEarth.

The hike to Hyalite Peak is 7.5 miles in length and has an elevation gain of 3,450 ft. Setting aside 8-9 hours round trip is recommended in order to reach the summit. Once at the top you are treated to a 360-degree view that allows one to see the Absaroka, Gallatin, Madison, Tobacco Root, and Bridger(Acrobat (PDF) 8.1MB Nov23 09) mountain ranges. Hyalite Lake, which sits in a cirque just below the peak, is a hike that will take roughly 6 hours round trip. As always, plan for inclement weather when traveling into the backcountry. The first part of the trail is a gentle climb, and sections of it are paved or graded so that it is wheelchair accessible up to Grotto Falls. The trail steepens in the upper reaches of the valley as you approach the "wall of death"--a steep final pitch with many switchbacks just before arriving at Hyalite Lake. Share the trail and be careful--the trail is used by hikers, trail runners, mountain bike riders and horse riders. The following is a list of sites that lie close to the trail or within a short walk. Many waterfalls are within close proximity to the trail, or along a spur of short length.

Perhaps the most compelling features of the Hyalite Lake/Peak hike are the series of cascading waterfalls that can be seen from the trail. Here is a sampling of the falls, and an accompanying map to show their locations. You can download a PDF version of these waterfall locations.(Acrobat (PDF) 990kB Nov18 09)

Map to Hyalite Waterfalls

Map showing the waterfalls that can be seen on the Hyalite trial.

The Amphitheater

After hiking through the sub-Alpine forests, the first set of cliffs you encounter is an area known as the Amphitheater. This resistant ridge formed as a single large cooling layer of an andesitic lava flow. These rocks exhibit a fracture pattern known as columnar jointing. This feature is formed as the lava cools and contracts, creating a polygonal jointing pattern.

This is another view of the amphitheater wall. As water moves into the joints and then freezes, it effectively pries the rock from the face of the wall. Photo by Nathaniel Danz.

Columnar Joints, Hyalite Trail

Columnar jointing in massive andesite flow. Photo by Dave Mogk.

The "Amphitheater" is a favorite spot for ice climbers during the winter months of the year. When it is not covered with icicles, it is an excellent spot for viewing columnar jointing. This type of feature is formed as the result of contraction during cooling of lava. The piece seen here has fallen off of the main wall and settled in the talus field below. Photo by Nathaniel Danz.

The Hyalite Waterfalls

Grotto Falls

grotto travis

There are two trails that can be taken to this waterfall, one of them being wheelchair accessible. Grotto is the closest of the falls and can easily be reached in under an hour. Photo byTravis Courthouts.

Arch Falls


Here, Hyalite Creek has cut through the solid rock, creating a channel that flows under a small archway. Photo byTyson Berndt.

Silken Skein Falls

Silken Skein is a personal favorite of many hikers. It is secluded in its own canyon and is a sight to behold. During the late spring melt, this fall rages with water. But as the summer wanes, the volume of water subsides, creating a gentle flow that is similar to a light rain. This an excellent spot for viewing debris flows as well. Photo byTravis Courthouts.

Champagne Falls


Champagne Falls is tucked away in a tight ravine. When the water levels are low, it is possible to hike along the creek and venture close to the top of the falls where there is an outcrop of rounded clastics that have been cemented together. Photo by Tyson Berndt.

Chasm Falls

Shower Falls

Shower falls Nathan

Aptly named, this waterfall is an inviting place to stop and wash up mid-hike. Here the creek spreads its path and gently flows over a wide expanse of rock. Look closely at the paths the water takes through the many joints and cracks within the rock. Photo by Nathaniel Danz.

Apex Falls


Although this waterfall looks like an inviting waterslide, it's better to just enjoy it from the trail. Photo by Tyson Berndt.

S'il Vous Plait Falls

Alpine Falls

Sil Vous Nathan

Alpine is the last of the falls and signals that the lake is soon approaching. Photo by Nathaniel Danz.

Hyalite Lake

Coming up and over the last set of switchbacks, Hyalite Lake is a welcome site, sitting at the base of the surrounding volcanic cliffs.

Hyalite Lake
Hyalite Lake is an excellent place to watch the sun disappear behind Hyalite Peak. Bring a tent and set up a base camp so that you'll have ample time to bag the peak and explore the glacial topography on the way down. This photo was taken in late September. Photo by Nathan Danz.

Hyalite Lake

Hyalite Lake, seen on a morning trail run in early August. Photo by Dave Mogk.

Hyalite Peak

Continuing past Hyalite Lake, Hyalite Peak looms another 1.5 miles in the distance. The trail traverses through beautiful high Alpine meadows. The trail can be pretty muddy from snowmelt, and snow may still be present on the north facing headwall late into the summer. Walk gently across these delicate Alpine meadows!

Approach to Hyalite Peak

On the trail approaching Hyalite Peak, crossing Alpine meadows. Photo by Dave Mogk.

  Hyalite Peak looking north

Looking north from the shoulder of Hyalite Peak. Note the U-shaped valley, steep talus slopes, and active mass wasting in the form of small landslides, hummocky topography, and solifluction (flow) lobes. Photo by Dave Mogk.

  Hyalite Peak, looking north

View to the south of Hyalite Peak, along the Gallatin Crest Trail. Photo by Dave Mogk.

Beyond Hyalite Peak to Windy Pass

The Gallatin Crest Trail continues south to the northern border of Yellowstone Park, and provides superb access to beautiful Alpine wilderness. This area is home to mule deer, elk, and grizzly and black bears--carry your bear spray and be "bear aware"! The trail can be quite rubbley and rough in some places, and be aware that there is very little water available except for snowmelt, a few seasonal springs, and a more reliable spring at the Windy Pass cabin some 18 miles to the south. From the Hyalite Peak trailhead to Windy Pass is the route of the famous "Devil's Backbone" trail run (25 miles one way, 50 miles out and back). This trail is also a very popular (and challenging) route for mountain bikers. Here is a collage of photos of what you'll see on the trail from Hyalite Peak to Windy Pass.

  Hyalite Peak, trail to south

Gallatin Crest Trail just south of Hyalite Peak. Photo by Dave Mogk.


Gallatin Crest Trail south of Hyalite Peak. Photo by Dave Mogk.


Gallatin Crest Trail south of Hyalite Peak. Photo by Dave Mogk.


Gallatin Crest Trail south of Hyalite Peak. Photo by Dave Mogk.


Gallatin Crest Trail south of Hyalite Peak. Photo by Dave Mogk.

Trail running on the Devil\

Trail running on the Gallatin Crest Trail. Photo by Dave Mogk.

Windy Pass, looking to the south

View of Windy Pass looking south from near Sentinel Peak. Photo by Dave Mogk.

Geologic Setting

Canyon View to North

This is a view to the north of the Hyalite drainage. Notice the east wall of the valley and the extensive depth of the volcaniclastic layers. Photo by Tyson Berndt.

West Canyon Wall

This is a view of the west canyon wall, as seen from Silken Skein falls. Photo by Tyson Berndt.

For a detailed view of the geologic setting, observe the Gardiner 100,000 Quadrangle Geologic Map from the Montana Bureau of Mines (this map can be downloaded as a PDF, or can be purchased as hard copy from MBMG). For further reference here is a Geologic Time Scale(a 900 by 530 pixel JPEG) version.

The Hyalite Canyon area is located in the northern section of the Gallatin Range which, on a much larger geologic scale, is part of the Wyoming Archean Province (Mogk et al., 1992). The Wyoming Archean Province is composed of some of the oldest rocks on the continent, and rocks in the Gallatin Range have yielded ages as old as 3.2 billion years (using the U-Pb zircon method). In her Master's Thesis, Karen May (May, 1985) described these rocks as being predominantly quartz and feldspar bearing gneisses, metamorphosed basalts, with minor metasedimentary rocks. The basement rocks that are currently exposed at the surface were once buried as deep as 25 kilometers (~15 miles), and experienced temperatures as high as 750oC and 10 kilobars (over 10,000 atmospheres) of pressure! These rocks are well exposed on the Hyalite Canyon Road from the Gallatin National Forest boundary south to the Moser Creek area, north of Langohr Campground areas. These rocks contain some of the best "hard rock" climbing routes in the area!

These basement Archean metamorphic rocks are covered by more than 4,400 feet of Paleozoic and Mesozoic layers of sandstone, shale, and limestone (Weber, 1965). That's equivalent to stacking three Empire State Buildings on top of one another. According to Todd (1969), these sedimentary layers were approximately 10,000 feet thick in the southern part of the Gallatin Range and were subsequently removed by the erosive power of wind, water, and ice. Evidence for this lays in the fact that some of the Eocene Absaroka Volcanic rocks rest directly on top of the Archean metamorphics. The only way for this to occur is for the previous layers of sediment to be completely weathered away from the scene prior to deposition of the volcanic rocks. Just imagine the span of time it would take to carry away all of that material! Check out the stratigraphic column for Montana:

Stratigraphic Column for Montana

The Eocene (~56-34 million years ago) Absaroka Volcanic rocks that dominate the landscape lie on top of the Paleozoic and Mesozoic sediments (and locally on the Archean basement). These volcanics were the result of massive outpourings of epiclastic (gravel, sand, and mud deposits consisting of older rocks; these are major debris flow deposits known as lahars), some volcanic ash fall deposits (these are pyroclastic rocks) and relatively rare andesitic lava flows (Todd, 1969; Chadwick, 1970). This volcanic region stretches from Bozeman, Montana, 150 miles southeastward into Wyoming (Chadwick, 1970). The Eocene Absaroka Volcanics are part of a massive volcanic event that impacted most of the northwestern part of North America, including the Challis Volcanics of central Idaho, San Poil Volcanics of north central Washington, and the Montana Alkali Province that lies in the northern and eastern part of the state. The Absaroka Volcanics have an eastern belt that is more potassic in composition, and a western belt that is more sodic in composition. Eruptive centers have been documented in the northern Gallatin Range, Emigrant Peak in Paradise Valley, Electric Peak in the northwest corner of Yellowstone National Park, Mt. Washburn in the central part of Yellowstone, and Sunlight Basin on the eastern border of Yellowstone near Cody, WY. Here is a reference map that illustrates the extent of the Absaroka Volcanics (produced by Dr. Todd Feely, Dept. of Earth Sciences, Montana State University).[b rlear]

Geologic Map of the Eocene Absaroka Volcanic Field

Reference map showing the distribution of the Absaroka Volcanics. Map by Dr. Todd Feeley, used with permission.

The volcanics situated in the northern Gallatin Range are more than 6,000 feet thick, and are, for the most part, resting horizontally or dipping gently to the southeast (Chadwick, 1970). The volcanic history of the area is discussed in greater detail in the following section. Volcanic units include extrusive rocks (volcanic ash and lava flows), intrusive rocks (dikes and sills), and massive debris flows (lahars).
Hiza, Volcanic Layering

This image can be found in Margaret Hiza's Master's Thesis. It shows the general stratigraphic makeup of the Gallatin Mountains in the Hyalite region.

The initial structure of the Gallatin Range was established during an episode of mountain building called the Laramide Orogeny which began roughly 65 million years ago. This type of mountain building was caused by immense compressional forces from tectonic plate interactions that created high angle reverse fault zones. The compressive forces basically split the Archean basement rocks into pieces, some of which moved up and some of which moved down (Levin, 2006). As these large sections of basement rock were uplifted, overlying sedimentary layers were pushed up producing overturned and folded layers of rock, and these uplifts were subsequently eroded to their present levels of exposure. Resultant features included domes, basins, monoclines, and anticlines. This particular faulting is thought to have developed by drag and friction as the eastward trending Farallon plate scraped the underside of North America's cratonic margin. The mountains we see today are also the result of repeated episodes of Cenozoic extensional "normal faulting" (Levin, 2006). Examples of these two styles of faults are illustrated in the figure below. The landscape we see today is the result of erosion by glaciers, rivers, and surficial "mass wasting" processes that continue to sculpt the surface of the Earth. For more detailed information concerning Laramide deformation in the Gallatin Range, refer to Erick Miller's graduate thesis located in the Montana State University Library or Dr. David Lageson's interpretation of the structural evolution of the nearby Bridger Range (Lageson, 1989).
normal fault

The image on top is an example of a normal fault. One side of the strata drops down when compared to the other.The image on the bottom is an example of a reverse fault. This is the type of fault that occurred during the Laramide mountain building episode. Notice that one side of the strata is pushed up compared to the other. Photo taken from http://www.nps.gov


This is a view of the east wall of the cirque located just above Hyalite Lake. Erosive forces have sculpted this present-day landscape. Notice the layering of debris flows and how this material is deposited downslope when it breaks away. Photo by Tyson Berndt.

Silken Skein Erosion

Here the forces of water have carved this ravine at Silken Skein Falls. Once again, the debris flow layering is quite noticeable. Photo by Tyson Berndt.

rock creek

These debris flows are located roughly 30 miles south of Hyalite off of the Rock Creek trail. This shows that the forces depositing this material acted over a vast expanse of territory. Photo by Tyson Berndt.

The Absaroka Volcanics produced voluminous outpourings of lava, ash and volcaniclastic sediments that originated from two northwest trending belts of eruptive centers named the Eastern Absaroka belt and the Western Absaroka belt (Chadwick, 1970). The entire Absaroka Volcanic province is composed of ~30,000 cubic km of basaltic (flowing) and rhyolitic (explosive) rocks that cover an area over 23,000 square km in northwestern Wyoming and southwestern Montana, constituting the most substantial Eocene volcanic field in the Northern Rocky Mountains (Feeley, 2003). During a mountain building cycle named the Laramide Orogeny, crustal deformation created zones of weakness within the cratonic (basement) layer which in turn produced channels through which magma could move, thereby forming intrusive and extrusive rocks. The Absaroka Volcanic province is dotted with these ancient eruptive centers and the Hyalite area just happened to be one of them (Chadwick, 1970). One of the most interesting characteristics of this volcanic province is that the Eastern Absaroka belt is more potassic in makeup than the Western belt. Further explanation of this can be explored by reading the works of Todd Feeley and Robert Chadwick, listed in the reference section below. The composition of the lavas, and the types of volcanic deposits seen in the Absaroka Volcanics indicates that the original volcanoes were probably stratovolcanoes that probably looked and acted very much like the volcanoes in the "ring of fire" that surrounds the Pacific Basin (for example Mt. St. Helens in Washington state)--complete with the steep sided "snow cone" shape, alternating layers of ash and lava, dangerous pyroclastic eruptions, and production of huge debris flows (lahars)!

typical volcano

Schematic diagram of a typical stratovolcano. Image obtained from the USGS.

Fallout: Volcanic Tephra

Tephra is the term used to describe all of the clastic materials that are ejected from a volcano and transported through the air. These include volcanic dust, ash, cinders, scoria, pumice, bombs, and blocks (Bates, Jackson 1984). As these particles settle out, some are fused together, creating a formation known as welded tuff.


Mount St. Helens 1980 eruption column, Cascade Volcano Observatory, United States Geological Survey

Lahar 2

Vesicular and non-vesicular contact zone. This rock is found in the Hyalite cirque. Photo by Tyson Berndt

Lava Flows and Columnar Jointing

Columnar jointing is formed when a lava flow cools quickly, from the outside of the flow to the center of the flow. This causes the rock to contract as it becomes more dense which in turn causes tensional stresses. If these stresses exceed the tensile strength of the rock, it will fracture. The fractures occur at right angles to the surface of the lava flow. This is why the columns are vertical in outcrop, as they were cooled from the top and bottom inward. Jointing also forms at 120 degree angles to one another around the point of contraction. This forms the hexagonal column that we see today.

Palisade Falls Columnar Jointing

This is Palisade Falls, which is located a few miles north of the Hyalite Peak Trailhead. This is an excellent site to view columnar jointing. The structure here is very similar to the jointing seen at Devil's Tower National Monument in Wyoming. Photo by Tyson Berndt.

Palisade Falls

Another picture of Palisade Falls. This is a short hike that is also wheelchair accessible. The trailhead is on the east side of the reservoir and is clearly marked from the main road. Photo by Tyson Berndt.

columnar jointing 1

Columnar jointing formation, Dr. Bruce Railsback, University of Georgia.

Debris Flows and Layering

These deposits seen at Silken Skein falls can be easily distinguished from one another by the change in clast sizes. These are actually different pyroclastic flow deposits that sourced from eruptive centers around southwest Montana (see figure above). Some are normally graded while others are inversely graded. A normally graded deposit will have the largest and heaviest clasts at the bottom of the deposit, while inversely graded deposits have the largest clasts at the top. Pyroclastic flows begin with the collapse of an eruption column, much like the one that Mt. Saint Helens produced in 1980. As the column collapses tephra (ash, pumice, hot gases, etc.) are pushed out laterally. The flow hugs the ground under the force of gravity while at the same time spreading in width, sometimes flowing at speeds up to four hundred and fifty miles per hour. These flows are also extremely hot, at temperatures up to one thousand degrees Celsius! Aren't you glad you weren't hiking this trail while these flows were occurring?! For an in depth look at the various types of debris flow layering that occurred in the Hyalite area, examine Margaret Hiza's work listed in the reference section. The deposits that are seen at Silken Skein were formed by processes very similar to those that took place during the eruption of Mt. St. Helens in 1980.

Hiza, Silken Skein

This is a drawing from Margaret Hiza's Master's thesis showing some of the flow layers at Silken Skein falls.This is an example of inverse grading.

Lahar 2

The flow layering at the Silken Skein area represents differences in deposition. Some layers are normally graded and others are inversely graded. Photo by Tyson Berndt.

Lahar 2

Can you see the distinctive boundaries between layers? Pay close attention to the size of the particles in each section. Photo by Tyson Berndt.

Mt. St. Helens plume

The eruption of May 18, 1980 sent volcanic ash, steam, water, and debris to a height of 60,000 feet. The mountain lost 1,300 feet of elevation and about 2/3 of a cubic mile of material. This debris streamed downward from the center of the plume and resulted in the formation and movement of pyroclastic flows down the left flank of the volcano. USGS Photograph taken on May 18, 1980, by Austin Post.

Pyroclastic flow

This is a graphic from "Dome Collapse Generates Pyroclastic Flows, Unzen Volcano, Japan." Notice the progressive steps leading up to the pyroclastic blast. Image courtesy of the United States Geological Survey.

Present Day Volcanism Reminiscent of Hyalite

The processes of sedimentation in volcanically active regions are quite unique because they occur very rapidly and include very large volumes of material (Hiza, 1994). By looking at present-day volcanic deposition, the mechanisms of sediment transportation of the past can be better understood. One of the best places to go for information and archival footage regarding volcanic processes is the Cascade Volcano Observatory and the Yellowstone Volcano Observatory Photogallery. Each of these sites provides photos and interpretations of processes that help to visualize and better comprehend the forces that are required to change the face of the earth.

Geomorphology and Landscape Evolution

Glaciation of Hyalite Canyon

Hyalite Canyon has been glaciated multiple times, and two of Hyalite's glacial advances have been mapped by Mark W. Weber in 1965. These two advances have been given the general names "Pinedale" and "Bull Lake" in the Rocky Mountains. The Pinedale maximum advance of the Hyalite Glacier was approximately 16 to 24 thousand years before present, while the Bull Lake advance was around 150 thousand years before present. Evidence of glaciation is seen throughout the Hyalite basin in erosional features such as the U-shaped valley and numerous depositional features known as moraines (deposits of unsorted, unconsolidated debris that sheds off the end of a glacier. "Terminal" or "recessional" moraines form because glaciers act as conveyor belts, transporting eroded rock and soil debris. When the rate of melting of the glacier is almost the same as the rate of flow of ice down the mountainside, the glacier deposits its materials at its end, forming low, long ridges of this loose, unconsolidated, and unsorted debris).

Terminal Hyalite

This is the terminal moraine of the last advance of the Hyalite Glacier to date, Photo by Tyson Berndt.

polished basalt

These rocks in the cirque basin have been smoothed down and effectively "polished" by the overlying glaciers, Photo by Tyson Berndt

The Bull Lake advance of the Hyalite Glacier flowed all the way down the drainage to the present day location of the Langohr Springs Campground which you will pass on the way to the trailhead. The ice from this advance was up to one thousand feet thick in some spots, such as the present day location of Hyalite Reservoir, and still approximately eight hundred feet thick where Grotto Falls is currently located. Glacial moraines can be seen on the east ridge adjacent to the Langohr Springs Campground.

Hyalite ice extent

This is a map of the ice extent of the two largest glaciations, Bull Lake and Pinedale, Image created by Tom Beers, using Google Maps.

The Pinedale moraines can be seen from the road on the drive up to the Hyalite trailhead. There are three distinct moraines that lay directly east of the Hyalite Reservoir Dam. The three sharp crested ridges to the south of Wild Horse Creek are these deposits.

There is also a deposit in the east cirque just below Hyalite Peak which is worth observing if one has the time. It is the most recent deposit of the Hyalite Glacier, referred to as the neo-glacial advance by glacial geologists, that is an advance that occurred in the last few thousand years (a picture of the deposit can be seen above).

Various other glacial features can also be seen throughout the drainage, such as glacial erratic boulders, glacial polish, striation, and cast and groove marks. Some large boulders which lay in the valley seem out of place or are anomalous, because they are not the same type of rock as that which surrounds them. They are also too large to have been moved by the present day creek from up valley. This is rock that was entrained by the glacier and moved from its place of origin to the present day location.

glacial erratic

erratic source

These large conglomerate boulders are similar to erratics found farther down the canyon. Imagine these boulders falling on top of a large sheet of ice and then being slowly transported down-slope over time. Photo by Tyson Berndt.


Glacial polish, striation, and cast and groove marks are a result of ice that has picked up "tools," such as small rocks, that have then been ground into the bed of rock over which the glacier was flowing. The ice can carry, roll, or stick and slip these tools leaving lines called striations, cast marks, or imprints of the tool. Striations preserve the flow of the glacier at the time the tool was moved over the bed, while casts show the rolling of the tool, and grooves demonstrate a stick and slip nature.

glacial polish

Glacial Striations, taken from Pothole Dome,Glacial Features, http://www.geocaching.com/seek/cache_details.aspx?wp=gc1qn2j.

Pro Talus Ramparts

Funny name, but simple process! These are features that one can see at the base of steep talus slopes, or loose rock slopes. They are ridges that parallel the slope at the hill's toe and are normally very coarse and full of boulders. Pro talus ramparts form as a result of winter snow accumulation in the high mountains. Slopes in the Gallatin range can get on average 30 ft of snow or more, and the lower reaches of these slopes have more snow than the upper parts due to sluffing and avalanching. This has the effect of making the hillside extend out into the basin or cirque farther, which makes the slope more gentle. When a rock falls on this surface, it slides or tumbles along this new slope formed by the snow, which deposits the rock at the slope's toe. Since this toe is more basinward than the slope's toe without snow, the rock is deposited in the form of a new ridge past the talus slope's toe. Check it out!

pro-talus rampart

Notice the steep front slope. This is where the rocks come to rest against a snow barrier, gradually increasing in height as more and more rocks pile up. Photo by Tyson Berndt.

talus slopes

These are talus slopes. Talus refers to the accumulation of rock fragments at the base of a cliff or steep slope. Photo by Tyson Berndt.


Notice anything out of the ordinary as you drive to the Hyalite trailhead? On Hyalite Canyon Road there is an active landslide within the first 3 miles after the turn off of south 19th street. This landslide has been caused by deep fluvial incision (a large amount of stream erosion), which has oversteepened the walls that contain Hyalite Creek. This has caused the ridge to collapse catastrophically, as it continues to pile debris on the road year after year. This landslide is under turbulent flow, meaning that it is not moving as a sled over snow (such as laminar flow in a glacier), but more like a stream in which the material mixes. This causes "drunken trees" which are named for their random orientation and erratic angles at which they lean.The photo below shows a landslide that occurred in Yellowstone Park, similar to the slide in Hyalite Canyon.

Landslide cleanup in Hyalite Canyon, May 2007. Photo courtesy of Sean Sperry and Bozeman Chronicle.

Landslide in Yellowstone National Park. Photo courtesy of USGS.

Hill Creep and Frost Creep

Hyalite canyon has other types of soil movement: hill creep and frost creep. Hill creep is the slow, downslope movement of material caused by gravity. This process occurs in the upper few feet of soil, and decreases rapidly with depth (Ritter, Kochel, Miller, 2002). The existence of soil creep can be observed by the presence of curved trees that vegetate the landscape. These trees look like pistols at their bases, due to the fact that the tree has rolled downslope and then straightened up again, hence the name, pistol butted trees. The trees look this way because the soil under them is actually creeping downhill overtime. This movement is normally a result of steep slopes and water laden soil, which reduce the cohesion and internal friction of the soil body. Frost creep is the downslope movement of particles resulting from the expansion and contraction of ice within the soil (Ritter, Kochel, Miller 2002). As the temperature drops, ice crystals form within the soil and then expand. This expansion dislodges soil particles, making them susceptible to gravity when the ice thaws.

hill creep

This is some of the visual evidence that is used to show the existence of hill creep, Photo courtesy of earthsci.org.

soil churning

Ice crystals found in the soil on the final switchback to Hyalite Lake. This is evidence of frost creep. Photo by Tyson Berndt.


Solifluction is a process in which water logged soils creep downhill over an impermeable or permanently frozen soil layer. This process occurs during the melt season, or spring months, when melting is at its peak and large amounts of water are contributed to the ground. The top layer of soil retains a large portion of this water, sometimes reaching its maximum amount, which is the saturation point. This added weight causes the layer of soil to mass waste, or move downhill under the force of gravity. We can see these deposits of solifluction today in Hyalite Canyon and actually almost everywhere. They are parallel lobes that move downslope perpendicular to the slope. The trail to the peak actually crosses a few; be sure to observe them on your way towards the summit.

  Hyalite Peak looking north

Looking north from the shoulder of Hyalite Peak. Note the U-shaped valley, steep talus slopes, and active mass wasting in the form of small landslides, hummocky topography, and solifluction (flow) lobes. Photo by Dave Mogk.

Avalanche Deposits:

In the spring, wet snow avalanches occur because of an increase in snow density which causes the snow to slide down the slope. These avalanches can occur via point releases, that is, starting from a single point and widening downslope, or they can also pinwheel, or build like a snowball as they roll. These avalanches can involve snow all the way down to the underlying rock and soil. When avalanches of this nature occur, they often entrain rocks off of the talus that underlies, and deposit them on the sides and at the terminus, or end of the avalanche. After the snow melts, the rock deposits are all that is left, which we see in the summer as levees which connect at the bottom. These features can be seen in the east cirque of Hyalite peak, directly above Hyalite Lake. The Google Image shown is in the west cirque of Hyalite Peak.

avi deposits

These deposits are evidence of wet snow avalanche action. Photo by Tyson Berndt.

References and Further Reading

Alt, David, and Hyndman, Donald W., 1995, Northwest Exposures- A Geologic Story of the Northwest: Montana, Mountain Press Publishing Company, 456 p.

Alt, David, and Hyndman, Donald W., 1986, Roadside Geology of Montana: Montana, Mountain Press Publishing Company, 427 p.

Bates, R. L., and Jackson, Julia A., 1984, Dictionary of Geological Terms Third Edition: New York, Anchor Books, 571 p.

Chadwick, Robert A., 1982, Igneous geology of the Fridley Peak quadrangle, Montana, Montana Bureau of Mines and Geology: Geologic Map 31, 9 p., 1 sheet, 1:62,500.

Chadwick, Robert A., 1970, Belts of Eruptive Centers in the Absaroka-Gallatin Volcanic Province, Wyoming-Montana: Geological Society of America Bulletin, v. 81 p. 267-274.

Feeley, Todd C., 2003, Origin and Tectonic Implications of Across-Strike Geochemical Variations in the Eocene Absaroka Volcanic Province: The Journal of Geology, Vol. 111, No. 3, p. 329-346.

Feeley, Todd C., and Cosca, M.A., 2003, Time vs. Composition Trends of Magmatism at Sunlight Volcano, Absaroka Volcanic Province, Wyoming: GSA Bulletin, Vol. 115, No 6, p. 714-728.

Fritz, William J., 1985, Roadside Geology of the Yellowstone Country: Montana, Mountain Press Publishing Company, 149 p.

Hiza, Margaret M., 1994, Processes of Alluvial Sedimentation in Eocene Hyalite Peak Volcanics, Absaroka-Gallatin Volcanic Province, Southwest Montana [Masters Thesis]: Bozeman, Montana State University, 167p.

Kochel, Craig R., and Miller, Jerry R., and Ritter, Dale F., 2002, Process Geomorphology: Illinois, Waveland Press Inc, 560 p.

Levin, Harold, 2006, The Earth Through Time, Eighth Edition: New Jersey, John Wiley & Sons, 547 p.

Lindsay, Charles R., 2002, Petrogenesis of Eocene Calc-alkaline Magmatism at Electric Peak and Sepulcher Mountain, Absaroka Volcanic Province, Montana and Wyoming [Masters Thesis]: Bozeman, Montana State University, 155 p.

May, Karen A., 1985, Archean Geology of a Part of the Northern Gallatin Range, Southwest Montana [Masters Thesis]: Bozeman, Montana State University, 91 p.

Miller, Erick W. B., 1987, Laramide Basement Deformation in the Northern Gallatin Range and Southern Bridger Range, Southwest Montana. [Masters Thesis]: Bozeman, Montana State University, 78 p.

Mogk, D., Mueller, P., and Wooden, 1992, The Nature of Archean Terrane Boundaries, an Example from the northern Wyoming Province. Precambrian Research, v. 55, p. 155-168.

Todd, Stanley G., 1969, Bedrock Geology of the Southern Part of Tom Miner Basin, Park and Gallatin Counties, Montana [Masters Thesis]: Bozeman, Montana State University, 63 p.

Tysdall, Russell G., 1966, Geology of a Part of the North End of the Gallatin Range, Gallatin County, Montana [Masters Thesis]: Bozeman, Montana State University, 95 p.

Weber, W. Mark., 1965, General Geology and Geomorphology of the Middle Creek Area, Gallatin County, Montana [Masters Thesis]: Bozeman, Montana State University, 86 p.

  • Yellowstone
  • Sours: https://serc.carleton.edu/research_education/trail_guides/hyalite.html
    1. Palmdale animal shelter phone number
    2. Manors for sale in texas
    3. Garmin nuvi cables for charging

    Hyalite Creek Trail

    Length: 11 miles (round-trip to Hyalite Lake)
    Duration: 4-6 hours
    Difficulty: Moderate
    Elevation Gain: 1,900 feet
    Activities: Hiking, mountain biking, trail running, cross-country skiing 
    Crowds: Heavy traffic

    Located just south of Bozeman past Hyalite Reservoir, Hyalite Creek Trail is a great place for a scenic hike or an active trail run. With waterfalls scattered throughout a glacial U-shaped canyon, this out-and-back trail is well-maintained for hikers, bikers, and skiers of all abilities. The trail runs all the way up to Hyalite Lake–Hyalite Peak is an extra two miles beyond for those interested in a longer journey. This trek is doable for most skill levels, and the beauty surrounding the trail is unmatched. Hikers look out for bikers, and vice versa. Carry bear spray. 

    Seasonal Conditions
    Snow sticks around up Hyalite Creek well into the spring, so be wary of dangerous run-off conditions. During the winter, wear gear for slick, icy conditions; it's a bit of a trek over the ice but seeing the frozen waterfalls is worth it. Another option is to strap into a pair of cross-country skis for a beautiful winter trip. 

    Head south on 19th Ave. and turn left onto Hyalite Canyon Rd. Drive past the reservoir. Keep right at the fork and take the road to its end at the Hyalite Creek parking lot. 

    Robert Stone's Hyalite Creek Map

    Map courtesy of Robert Stone'sDay Hikes Around Bozeman, Montana

    Sours: https://outsidebozeman.com/trails-tours/hiking-trails/hyalite-creek-trail
    Hiking to Grotto Falls - Bozeman - Hyalite Canyon ~ {Ep 167}

    Some of my favorites. In the clinic, I took a referral and the first thing I did was go to a therapist. Still, I am not sure exactly what I have there, and it is better to consult. The therapist turned out to be a nice elderly woman who, after listening to me (she did not examine me), confirmed Dimka's words.

    Most likely this is varicose veins, perhaps even a blood clot, that is, I need to go to the surgeon.

    Hiking map trail canyon hyalite

    And I liked that too. Taking my breast in my hand, I sucked the nipple with pleasure, and with the other hand through the robe I crushed the other. tit.

    Hiking Bozeman Montana - Baldy Mountain by way of M trailhead

    I'll try. Why did you refuse to kiss me on the lips. he looked at her intently.

    Now discussing:

    " "What, no but. "- another slap in the face, -" crawl, damn it. " second she got up, looked at me and said. "Dima, what are you doing. barking Youre out of your mind, Im good enough for you.

    1925 1926 1927 1928 1929