Toyota Tacoma 2005-2011 Winch Bumper
Frequently Asked Questions:
- Does the winch mount come with winch, fairlead or shackles?
No it does not. Bare steel winch mount and reinforcement plates only. You will use your factory hardware.
- Do you offer combination kits with discounts?
Why yes we do! Look for them in the category of your vehicle below this product listing. These money and time saving kits come with a winch mount, winch and shackles with options for lights and thimbles. They ship free to the lower 48 states via FedEx Ground.
- Do you ship outside of the United States? If so, how much is shipping?
Yes, we ship Internationally and have done so to Europe, Japan, Australia, New Zealand, Chile, Russia, Middle East, well, pretty much every continent, including Antarctica!. It can be expensive as we are shipping a 60+ lb chunk of steel but we are able to ship this in custom made double wall boxes which makes shipping much less expensive than other bumpers.
However, we DO have the ability to obtain special pricing from FedEx on a case by case basis. For example, we have shipped to the Middle East for as little as $200-250, Australia for $275-325.
Please use our contact form to send us your full shipping information for a quote. Please visit our shipping page for more information.
- How much does it cost to ship domestically?
We ship via FedEx Ground here in the 48 states. Add the product to your cart then go to your cart, there you will be given an opportunity to receive a shipping quote based on your address. Typical costs are $30-40 in the central part of the country and $45-60 to each coast. Please visit our shipping page for more information.
- What winches fit this mount?
Just about any winch will work. Read this technical article in our blog for a more in depth answer. The mount uses a standard 10" x 4.5" bolt pattern so any winch will fit and there is plenty of room in the mount itself.
We suggest a winch with a relocatable solenoid box or a winch of your choice that shares the same basic design with a remote solenoid/control box, this way you can locate the box wherever you want it.
Most winch manufacturers have gone to a smaller control box and/or have made it where you can mount over the winch spool or over the motor (passenger) side of the winch, so typically not a problem.
Consider our Combo Kits, they are tried and true!
- What winch rating do you suggest for this application?
That is a big question. Unless you drive an FJ40 or a CJ/TJ you better go with 9000 lbs or larger. Most of what we sell in our combo kits are 9500/10000 to 12000 lb winches. Read this article for a more in depth discussion of winch ratings and overall selection: https://www.usoffroad.us/winch-selection/
- Does the front end need to be lifted after installing this mount and a winch?
Short answer is maybe. Typically you will see a 3/8" to 1/2" drop by adding the mount (57lbs) and a winch (75-90lbs). This is still a much lighter alternative to a full bumper replacement (75-150lbs without a winch!). In our testing we noticed no difference in how a Tacoma drove after installation on a stock vehicle. Having said that, because most vehicles come from the factory with some rake (front lower than rear) it wouldn't hurt to lift it a bit to level things out. Read this article about using the Bilstein adjustable shocks to achieve a more level stance and much better ride vs stock for a reasonable price.
- How hard is it to install?
Not really hard at all. It takes more time to prep and paint/coat the mount than it does to install (we suggest our optional powder coat). Figure 3 - 6 hours depending on the equipment you are installing (just the winch mount, winch, lights, etc?) your abilities and how big of a hurry you are in. You can read the install docs (Documentation Tab above) and watch our customer supplied install videos for more info: https://www.usoffroad.us/fj-cruiser-winch-bumper-installation-videos/
- Will this work with suspension and body lifts?
Our bumpers work fine with any suspension lifts but will NOT work with body lifts as our bumper needs to line up with the bodywork but attaches to the frame. A body lift moves the bodywork in relationship to the frame.
2016-2020 Tacoma Off-Road Bumpers
- 2016-2021 Toyota Tacoma
An aftermarket off-road bumper gives your aggressive Tacoma an amazing look, a ton of extra protection, and the capability it needs to handle any challenge both on and off the road. A new bumper keeps your Tacoma's front-end better protected while improving your Tacoma's approach angles to better navigate tough terrain. Many of these bumpers can mount up winches and powerful off-road LED bars so that your Tacoma can get out of any jamb and light up the darkest of nights.Toyota Tacoma Fitments: 2016, 2017, 2018, 2019 Toyota Tacoma with 3.5L V6 & 2.7L I4 engines.Submodel Fitments: SR, SR5, TRD Sport, TRD Off-Road, Limited, TRD Pro.Some exceptions apply, please see individual product pages for specific fitments.
- 30 day game time wow
- Outdoor light fixture christmas decorations
- What is motorola notifications app
- Lds tools find a ward
Aftermarket replacement bumpers for your Jeep® or pickup trucks
N-FAB offers both front and rear bumpers to meet your style needs. N-FAB front bumpers are designed to allow for multiple light mount configurations, skid plates, or a winch. The rear bumpers come in pre-runner or heavy duty styles. Whether you are looking for style, protection or both, N-FAB has a bumper for you!
12302 Shiloh Church Rd., Houston, Texas 77066
© 2021 N-FAB, Inc. Do not sell my personal information.
2005-2011 Toyota Tacoma Front Bumper
• Built from CNC cut and brake formed 3/16″ HRPO steel plate.
• 3/4″ thick shackle tabs pass through the bumper and welded front and back.
• 10 bolt locations makes mounting rock solid. Uses only factory holes and studs…no drilling or welding required for install. Includes frame tie-in brackets and grade 8 bolts. If running remote reservoir shocks, modification of shock brackets may be necessary.
• Internal winch plate fits 8-10k winches with non integrated solenoid control boxes (control box must be relocated) with standard 4.5″ x 10″ bolt pattern.
• Includes 21” x 1.50” slot for 20″-21” single row LED light bar. Features adjustable width mounts to fit any brand bar.
• Includes square holes for LED pods with adjustable mounting brackets.
• Hi-Lift jack slots for safer lifting
• Multiple hoop options available (see pics)
• Available in bare steel only
• Not compatible with TRD off road aluminum skid plate.
• Designed, built, and tested in the USA 🇺🇸
**Bumpers are built to order and lead times vary depending on current workload. Orders can be taken on a $100 deposit, email [email protected] for more info. CURRENT LEAD TIME ON BUMPERS IS SEVEN MONTHS.
Tacoma front bumpers ship truck freight due to their size and weight. Domestic freight ranges from $200-$400 to your nearest terminal or a business address with loading dock or forklift. Please email [email protected] for a shipping quote. Shipping charges will be invoiced when bumper is ready to ship.
Local pickup in Gardnerville NV is welcome!
2005 Toyota Tacoma, 2006 Toyota Tacoma, 2007 Toyota Tacoma, 2008 Toyota Tacoma, 2009 Toyota Tacoma, 2010 Toyota Tacoma, 2011 Toyota Tacoma
W/ Full Hoops Around Headlights, W/ Low Prerunner Hoop, W/ High Center Hoop, W/ Low Center Hoop, Base Bumper No Hoop
Off 2006 bumper tacoma road
2006-2011 Toyota Tacoma Prerunner
If you use your truck for off-roading or heavy duty towing, a Throttle Down Kustoms PreRunner bumper is for you. If you're driving a 2006-2011 Toyota Tacoma, this steel PreRunner bumper offers extra protection and durable style for your truck. You'll be glad you upgraded. TDK PreRunners are made in the USA, are hand-welded, and can be powder coated in one of three colors. This bumper is easy to install, and the superior craftsmanship means your bumper may outlast your truck. We build our steel truck bumpers so well that they're guaranteed for life.
Some other features of all TDK bumpers include:
- Winch and/or LED mount options for Warn 8000lb - 16,500lb winches and Rigid Dually and D2 LEDs
- Provisions for front parking sensors and fog light holes
- 3/4 inch Clevis mounts with 7/8 inch holes included for severe duty
Get a custom steel PreRunner bumper for your 2006-2011 Toyota Tacoma. Shop now!
Please note: Factory fog light mounts not available, and the factory tow hook is not accessible. However, all bumpers come with 3/4 inch Clevis mounts with 7/8 inch holes.
QDave Weber • 08/12/2020, 1:13:58 AMDoes this bumper have lift points for a Hi Lift jack?
A08/12/2020, 3:30:37 PMYes it does.
QWill • 11/18/2020, 3:26:36 AMDo you have a recommended Winch that is confirmed to fit with this bumper?
A11/23/2020, 11:28:19 AMThe Warn VR EVO series is a great option.
QRandy • 03/08/2021, 1:26:48 PMwhat is the difference between the tube work and bull bar option? Witcg one has the prerunner tubing not the tubes that go around the headlights on built into the top of the bumper?
A03/11/2021, 10:14:52 AMYes, the tube work option is the prerunner style tube. The bull bar option is the full headlight hoop.
QJason • 03/21/2021, 12:32:31 PMCan I use stock fog lights for this bumper?
A03/22/2021, 6:22:06 PMNo, it's designed for aftermarket 3" x 3" LED cube lights.
QWilliam • 05/12/2021, 3:05:37 AMWill the Warn Zeon Platinum 10 winch fit on this bumper?
A05/12/2021, 2:02:55 PMYou would need to remote mount the solenoid box, but yes.
QJerome • 07/28/2021, 7:43:27 PMDo you need to cut the bumper on 2011 tacoma?
A08/12/2021, 4:01:01 PMFor 2nd Gen trucks, cutting the bumper is not necessary.
- Moto clock and weather widget
- Griddle plate for weber kettle
- Dodge challenger water pump problems
- Graduation caps decorated with pictures
- Ram 2500 rear suspension upgrade
- Americans season 6 episode 5
- Rustic metal letters hobby lobby
- How to hang smallwoods frames
The lady relaxed her anus, allowing me to penetrate her. Almost immediately my tongue buried itself in what she was going to fill my mouth with. But this did not prevent me from fulfilling the whim of the Lady.