Factory reset kasa smart plug

Factory reset kasa smart plug DEFAULT

How to reset TP-Link Kasa smart plugs, switches and outlets when moving house

Taking smart plugs with you when you move house is easy – especially if you remember to clearly label them – but things can be more complicated when it comes to smart switches and wall outlets.

These are often divides that feel more hard-wired (literally, in many cases) than smart plugs and other products that can simply be unplugged and taken away. And from the buyer's perspective, moving into a house missing its light switches and wall outlets could well be unappealing.

Read More:

Check Special Deals of Kasa Smart Plugs (2-Pack) on Amazon

A lot of companies make smart plugs, switches and wall outlets, but for this article we will focus on the Kasa Smart range by TP-Link, one of the more popular options out there. Kasa Smart has grown over the years to include a wide range of plugs, switches and outlets, but they all work in a very similar way.

The following instructions are compatible with almost every Kasa Smart device – over 30 in all – so instead of listing them we will be clear to explain when the instructions differ for a small selection of Kasa Smart products.

There are two forms of reset for Kasa Smart devices, a soft reset and a hard reset. The former does not erase the settings of the device, while the latter restores it to its factory defaults. If your smart plug, switch or outlet is playing up, then a soft reset would be best. But if you are moving house and leaving the device behind, you should perform a hard reset before the new owners move in.

TP-Link Kasa smart light switchSmart light switches are among the devices you might decide to leave behind when moving houseTP-Link

To perform a soft reset of your Kasa Smart plug, switch or outlet, follow this simple instruction:

  1. Press and hold the reset button for five seconds or until the Wi-Fi light blinks amber and green

The device can now be set up again using the Kasa smartphone app, but will retain information like the name you had previously assigned to it. The only exception for this instruction is the TP-Link HS105 Wi-Fi, where the light blinks amber and blue instead of amber and green.

To perform a full factory reset and return your Kasa Smart plug, switch or outlet to an as-new state, follow this instruction:

  1. Press and hold the reset button until the Wi-Fi light blinks amber rapidly (usually about 10 seconds). The device is not fully reset and ready to be set up as if unboxed for the first time.

A couple of exceptions here are the HS300 and KP303, where the control button works as both the power and reset button. For these devices:

  1. Press the control button to turn on or off the corresponding outlet
  2. Press and hold a control button for five seconds to re-enable setup mode
  3. Press and hold a control button for 10 seconds to restore the outlet to factory default settings.

Remember, you will need to do this for each of the power outlets of the device.

Lastly, if you cannot find the reset button of your TP-Link Kasa Smart device, look at the printed instructions that came with the product, or head to the TP-Link support pages for more help.

TP-Link AC1750 WiFi Extender (RE450), PCMag Editor's Choice, Up to 1750Mbps, Dual Band WiFi Repeater, Internet Booster, Extend WiFi Range further

Check out The GearBrain, our smart home compatibility find engine to see the other compatible products that work with TP-Link Kasa Smart Devices.

The GearBrain, First Compatibility Find Engine for Smart Deviceswww.youtube.com

Sours: https://www.gearbrain.com/factory-reset-tp-link-kasa-2653780059.html

If the Smart Plugs don’t work properly or you need the default configuration procedure again, you may need to reset your smart plugs. Sometimes it may happen that you are facing troubles with the settings or configuration of the smart plugs.

So, in this article, I am reviewing the procedure on how to reset some of the best smart plugs such as Gosund smart plug troubleshooting, Kasa smart plug, Amazon smart plug, Wemo mini smart plug, and TP-Link Smart wi-fi Plug.

How To Reset Smart Plug?

Here, I’m going to solve some problems! Hope this article will help you. Let’s enjoy these reset wi-fi settings.

How to Reset Gosund Smart Plug?

gosund smart plug google home

Though Gosund WiFi smart plugs are pretty standing and don’t usually create trouble, you sometimes need to troubleshoot. For example, you may face gosund smart plug not connecting or other problems. However, it is you can fix it. Here is given the way how to reset this smart wifi plug.

  • First, you have to unplug the Gosund smart plug.
  • On the second step, press the power button and hold it for a few seconds.
  • Then, plug it into the power outlet once again and leave the power button.
  • Finally, when the LED indicator will be solid then your factory reset is done.

Or enjoy this video if your gosund smart plug not connecting or you want to reset that.

How to Reset TP-Link Smart wifi Plug?

kasa smart plug review

Now let’s follow the steps on how to reset your tp-link smart plug outlet to its default factory setting:

  • Find the setting button along the top edge of the tp-link smart plug outlet where you will find an icon on the setting button that looks like a gear.
  • Then, tap and hold the settings button down for 10 seconds. Five seconds later, you will notice that the smart outlet’s Wi-Fi light will start changing its color between green and amber. And the rest 5 seconds, you will find that the power light is turning off and the wifi light is starting blinking between off and amber-colored very quickly.
  • This is the last step and in this step, you have to carry away your finger from the settings button when the Wi-Fi light begins blinking very quickly between turning off and being amber-colored. Then, you will notice that all of the lights on the tp-link smart plug will be switched off for a few seconds. At this time, you will eventually listen to a loud click and the power and Wi-Fi lights will turn back on again. The color of the wifi light will at first be a solid amber color, but a few seconds later, it will begin blinking between being amber and green. And congratulations! because you’ve done all the procedures of its default factory settings.

Let’s watch this video for more details.

How to Reset Wemo Plug or Wemo Smart Mini Plug?

Follow the Instructions to Reset Wemo Smart Plug:

  • Press and hold the power button for a few seconds with the Wemo Mini plugged in.
  • In this step, keep on holding the power button down till the Status Light starts to quickly flash white.
  • Then quit the power button to Wi-Fi reset the Wemo Mini and finally, wait for a few moments until the Wemo Mini will complete erasing rapidly its stored Wi-Fi settings and return into setup mode. Your all process is complete and now your Wemo Mini Smart Plug will come back to its default settings.

I’m mentioning a video below, you can flow for Reset Wemo Plug.

How to Reset Kasa Smart Plug?

Now let’s know the instructions about how to reset the tp-link Kasa smart plug:

  • At first, press the control button to turn the socket ON or OFF.
  • Then, press and hold the button for 5 seconds to take action on the configuration process (SoftAP).
  • And finally, press and hold it for 10s or until the LED blinks amber rapidly to restore the Kasa Smart Plug Mini outlet to factory default settings.

Or, Watch this short video.

How to Reset Amazon Smart Plug?

You may face amazon smart plugs not working or other problems, then you can fix it yourself! Just you need to reset your plug. Now we will know the steps on how to reset or deregister Amazon Smart Plug:

  • In the first step, you must have to press the reset button and hold the button on the  Amazon Smart Plug for 12 seconds.
  • In this step, you will see a red LED light and then release the button.
  • Finally, you will see a blue LED light blinking, and your  Amazon Smart Plug reset is complete.
  • Keep a registration of your Amazon Smart Plug in the Alexa app and follow the user guide for better results.

Or enjoy this video if your amazon smart plug is unresponsive, or you want to reset that, Check here.

When Does Your Smart Plug Require Factory Reset?

Your smart plugs need a factory reset if you face the below problems and can’t solve it with the setting.

  • If you can’t find your Wi-Fi Smart Plug with the associate Smart app.
  • If the associate Smart app can’t Turn On or Off the smart plug.
  • Or if you face a configuration problem with your Smart Plug And maybe face problems with LED.
  • If the Smart power outlet doesn’t respond to either app or voice controls.
  • Or issues with the smart plugs remaining connected to your Wi-Fi.

Besides, You may need the best surge protector power strip. Just read that article!

The setup procedure for the Smart Plug did not work. What can I do?

If the setup procedure for the Smart Plug did not work, then please follow the below factory reset procedure and try again the configuration procedure.

Here are the following directions switch to factory reset your wireless smart plug.

1)First,  Plug in the Wireless Smart on the wall switch.

2)Then press the reset button and hold it for about 8 to15 seconds and release it.

3)Then you will watch the blue indicator LED shine 5 times and listen to a clicking sound. Then the blue indicator LED will blink quietly, which points out your factory reset is complete successfully.

Why can’t I connect to Wi-Fi?

If you can’t connect your smart plug with wifi, you might need to reset your Smart Plug.

How do I pair the smart plug with my phone?

Please see these (android) (iPhone) videos on how to pair the smart plug with your phone.

How many Smart Plugs can I connect?

It depends on your Wi-Fi network capability. You can connect many smart plugs at a time as long as your Wi-Fi network can approve.

Why is the LED indicator off?

The Wi-Fi LED indicator is off which means the power outlet is off or the Wi-Fi LED has been deactivated in the App-Config mode.

Conclusion

Actually, smart wifi plugs are a great addition to get involved in a new experience of connected smart home devices as they can be controlled from the android app or you can use voice controls by linking them to Amazon Alexa or Google Assistant.

But, if you start facing problems with these smart plugs you may reset the smart plugs to come back to its default factory settings following our reset instructions.

Furthermore, if you decide to sell or give away the smart plug you have used in your home, it’s always an excellent idea to reset it to the default factory settings so that it’s no longer associated with your smart device or wireless network.

In conclusion, we want to say that hopefully our review on ‘How to reset smart plug’ will help you to troubleshoot some common problems on your smart wifi plug.

Besides, You may need the best wifi extender for spectrum internet! Just check out the article. Thank you

Default image
Richard Ward

Hey, it's Richard Ward here! I'm the founder and chief editor here at "GetBestElectronicsFind". I decided to start our blog to help people with their Electronics Gadgets and questions on technology. There's no aspect of technology that we aren't passionate about, especially Electronics Gadgets. If you're encountering a problem or need some advice with your Electronics Gadgets, drop me a line on Twitter.

Articles: 26
Sours: https://getbestelectronicsfind.com/how-to-reset-smart-plug/
  1. Label 1 2 x 3
  2. Roblox adopt me trading discord
  3. Kenmore 106 water filter replacement
  4. Plano isd new student registration
  5. West bradford township phone number

Resetting TP-Link Kasa smart plugs switches and outlets

Taking smart plugs with you when you move is simple – especially if you remember to explicitly mark them – but smart switches and wall outlets can be more complex.

These are frequently divisions that feel more hard-wired (literally in many situations) than smart plugs and other items that can be disconnected and removed. Moving into a property that lacks light switches and wall plugs may be unattractive to a buyer.

Many businesses produce smart plugs, switches, and wall outlets, but for the sake of this post, we’ll focus on the TP-Link Kasa Smart line, which is one of the more popular alternatives. Kasa Smart has expanded to accommodate a broad range of plugs, switches, and outlets over the years, but they all function in the same way.

Instead of presenting the instructions because they are compatible with virtually every Kasa Smart device – over 30 in total – we will be explicit to clarify when the instructions differ for a small number of Kasa Smart products.

Kasa Smart devices may be reset in two ways: soft reset and hard reset. The former does not wipe the device’s settings, whilst the latter resets it to factory defaults. A gentle reset is recommended if your smart plug, switch, or outlet is acting up. However, if you’re relocating and leaving the gadget behind, you should do a hard reset before the new owners take possession of it.

Resetting TP Link Kasa smart plugs switches and outlets

Here Are How To Resetting TP-Link Kasa smart plugs switches and outlets

To perform a soft reset of your Kasa Smart plug, switch or outlet, follow this simple instruction:

  • Press and hold the reset button for five seconds or until the Wi-Fi light blinks amber and green

The device can now be set up again using the Kasa smartphone app but will retain information like the name you had previously assigned to it. The only exception for this instruction is the TP-Link HS105 Wi-Fi, where the light blinks amber and blue instead of amber and green.

To perform a full factory reset and return your Kasa Smart plug, switch or outlet to an as-new state, follow this instruction:

  • Press and hold the reset button until the Wi-Fi light blinks amber rapidly (usually about 10 seconds). The device is not fully reset and ready to be set up as if unboxed for the first time.

A couple of exceptions here are the HS300 and KP303, where the control button works as both the power and reset button. For these devices:

  • Press the control button to turn on or off the corresponding outlet
  • Press and hold a control button for five seconds to re-enable setup mode
  • Press and hold a control button for 10 seconds to restore the outlet to factory default settings.

Remember, you will need to do this for each of the power outlets of the device.

Lastly, if you cannot find the reset button of your TP-Link Kasa Smart device, look at the printed instructions that came with the product, or head to the TP-Link support pages for more help.

Tags: alarmcontrollerdimmerslight switchessmart outlets

Sours: https://home-automations.net/resetting-tp-link-kasa-smart-plugs-switches-and-outlets/
How to factory reset a TP-Link Smart WiFi plug

How to Reset a Kasa Smart Plug

What to Know

  • Two options to reset Kasa smart plug; Soft reset (doesn't erase current settings) or factory reset (erases settings returning to like-new condition).
  • Soft reset: Press and hold the reset button for 5 seconds; the Wi-Fi LED light should blink amber and green.
  • Factory reset: Press and hold the reset button (it may be a control button) until the Wi-Fi LED light blinks amber rapidly.

This article provides instructions for how to reset a Kasa smart plug (aka TP-Link Kasa smart plug), including how to do a soft reset and how to factory reset the plug.

How to Reset a TP-Link Kasa Smart Plug

Regardless of the model of Kasa smart plug you have, the process of resetting it is pretty easy, but you have two options for resetting:

  1. Soft Reset: This resets the plug's functionality without removing any of the associated configuration settings. If your plug isn't functioning properly but still shows up in your smart home control system and seems to connect to Wi-Fi, you would use a soft reset.
  2. Factory Reset: This resets your smart plug back to factory settings, meaning you will need to reconfigure and reconnect it once the reset is complete. You will use this option if you're changing ownership of the plug or if the plug doesn't seem to be connecting to your smart home network at all.

How to Perform a Soft Reset on Your Kasa Smart Plug

A soft reset will fix most of the issues you're having with your Kasa smart plug, and it takes just a few seconds to complete.

  1. With your TP-Link Kasa smart plug still plugged into the power outlet, locate the reset or control button. Depending on the model of plug you have, the button may be on the top or the side of the device.

  2. Press and hold the button for 5 seconds.

  3. The Wi-Fi LED light should blink amber and green. When it does, you can go to the app and follow any prompts you may see there. If there are no prompts, once your smart plug stops blinking, the reset should be complete.

How to Factory Reset Your Kasa Smart Plug

If the soft reset doesn't fix your problem or change ownership of the plug, a factory reset is nearly as simple as the soft reset.

  1. Make sure your TP-Link Kasa smart plug is securely plugged into an outlet.

  2. Press and hold the reset or control button on your Kasa smart plug for about 10 seconds.

  3. When the Wi-Fi LED light rapidly blinks amber, you can release the button and the plug should switch back to factory default settings. You can then install and configure the Kasa smart plug as a new device.

How Do I Change the Wi-Fi on My Kasa Smart Plug

Unfortunately, there is no straightforward way to change the Wi-Fi on a Kasa smart plug from within the app. To change the Wi-Fi, you'll need to perform a factory reset on the device and then set it up again as if it were a brand new device.

Be sure you follow the directions above for factory reset as a soft reset will not erase the existing network data programmed into your Kasa smart plug.

Why Is My Kasa Smart Plug Not Working

If your previously installed Kasa smart plug stops working, there could be a few reasons:

  • Not connected to Wi-Fi: If your smart plug is not connected to Wi-Fi, it won't work properly. A sudden power outage (when the power goes off and comes right back on) could be the cause. Try unplugging the smart plug, waiting a few seconds, and then plugging it back in to see if that gets it going. If not, try one of the reset methods above.
  • Not connected to the right network: Most owners don't realize you must connect your Kasa smart plug to a 2.4 GHz network. A 5 GHz network will not work. Check the network that you've connected your smart plug to ensure it is correct.
  • You haven't set the plug up in the app: Once you install and connect to your smart plug, you'll need to install it in the app, and if you plan to connect to Alexa, you'll need to connect it to the Alexa app as well. Again, the Kasa app should walk you through the process.

FAQ

  • If you forgot your password, open the SmartThings app and select I’m a SmartThings user. Enter your email address and select Continue > Forgot your password. Confirm your email address, select Send Recovery Email, and follow the instructions in the email you receive.

How to Reset a Wemo Plug

Thanks for letting us know!

Sours: https://www.lifewire.com/reset-kasa-smart-plug-5193054

Plug smart factory kasa reset

Smart power strips like the Kasa Smart Plug Power Strip are a must-have in any home because they save you energy and money by automatically switching off devices when you aren’t using them. They are also a surge protector, which gives your devices extra protection from outages and storms. If your Kasa Smart Plug Power Strip doesn’t seem to be working, you might be wondering how to reset it.

To reset the Kasa Smart Plug Power Strip, press and hold the reset button for 5 seconds. The Wi-Fi LED light should begin blinking amber and then green. The smart plug will automatically turn off and then turn itself back on when it’s done resetting.

Below, we’ll go over how to reset your Kasa Smart Plug Power Strip in detail, as well as reasons why you’d want to reset your devices.

How to Reset Kasa Smart Plug Strip

If you have issues with your smart power strip, performing a soft reset is the best option for getting it back into working condition. A soft reset will not lose any of the configuration settings and should always be tried before doing a hard reset.

To perform a soft reset, follow these steps:

  1. Locate the reset button on your strip. It should be on the bottom of the side, depending on your model.
  2. Hold the button down for 5 seconds.
  3. Let go of the button when the light begins flashing amber.
  4. Wait for the light to start flashing green. (Keep in mind that for some models, the light will flash blue instead of green.)
  5. Once the light begins to flash green, it will turn itself off and begin the reconfiguration process.
  6. When it’s done, it will automatically turn itself back on.

How to Hard Reset Kasa Smart Plug Strip

If a soft reset did not work, the next step would be to try and perform a factory or hard reset. A hard reset will put the plug power strip back into factory settings just like when you first bought it. You will have to set up the power strip again and redo the programmed settings after a factory reset.

There are two ways to factory reset the Kasa power strips, depending on which one you have. For most models, try the following tips:

  1. Press and hold the reset button for about 10 seconds.
  2. Release it when it starts flashing amber.
  3. The power strip will turnoff and turn itself back on when it’s done resetting itself.

For the KP303 model, the control button can be used as the reset button. Follow these steps:

  1. Press the control button to turn off the outlet.
  2. Press and hold the control button for 5 seconds to re-enable the setup mode for the outlet you are resetting.
  3. Press and hold the control button for 10 seconds to restore the corresponding outlet to the factory default settings.

Keep in mind that the main switch on the power strip is used to turn the strip on and off, not to reset it.

After the reset process, you can use the Kasa app to complete the setup and return all your settings to the way they were before.

When Should You Reset Your Kasa Smart Plug Power Strip?

If you notice your Kasa Smart Plug Power Strip is not working, you probably have tried the reset options above to fix it. However, it’s essential to understand why your smart plug might not be working so in the future, you can avoid having to reset it repeatedly.

The most common reasons for needing to reset the Kasa smart plug are:

  • The smart power strip is offline.
  • The device won’t connect to the Wi-Fi.
  • The smart device won’t let you rename it.
  • It won’t connect properly to your smart devices.
  • The device won’t boot up or start up correctly.
  • Alexa doesn’t recognize the smart power strip.

All the issues above can usually be fixed with a simple reset. To fix the problems, you can also try the following:

  • Unplug and plug the smart power strip into the outlet again.
  • Check your Kasa app and make sure the outlet is listed under your Devices tab.
  • Check your Wi-Fi router and make sure it’s on and working.
  • Unplug and plug your Wi-Fi router in again.
  • Disconnect the smart plug power strip from your Kasa app and reconnect it.
  • Uninstall and re-install the Kasa app.
  • Move the power strip closer to your Wi-Fi router.

In Summary

Kasa’s Smart Plug Power Strip is a great way to automate your home. You can control your devices from anywhere and save energy and money with their automatic features.

However, if the device isn’t working, sometimes a reset is needed. To do this, just press and hold down the reset button for 5 seconds. Allow the light to start flashing and give the device time to turn itself off and back on.

Sours: https://smarthomestarter.com/how-to-reset-kasa-smart-plug-power-strip/
How to Reset TP Link Smart Plug Factory Settings

How to reset TP-Link Kasa smart switch and plug?

There are two types of reset available: a soft reset which does not erase the current settings, and a factory reset that erases all of your custom settings and restore the device to factory defaults.

 

To reset the smart switch/plug without losing the configuration settings:

Press and hold the reset button for 5 seconds or until the Wi-Fi LED blinks amber and green to initiate the app-config process.

Note: For HS105 Wi-Fi LED would be blinking amber and blue

To reset the smart switch/plug to factory defaults:

Press and hold the reset button until the Wi-Fi LED blinks amber rapidly (about 10 seconds) to reset the Smart switch to factory defaults.

For the HS300/KP303, the control button works as both the power and reset button.

  1. Press the control button to turn on or off the corresponding outlet.
  2. Press and hold a control button for 5s to re-enable setup mode for the corresponding outlet.
  3. Press and hold a control button for 10s to restore the corresponding outlet to factory default settings.

Note: The main switch on the back panel is to turn on or off your Smart Power Strip.

 

Note: If you cannot find the Reset button, please go to our official website and search your device’s model number and go to the product’s Support page to check or download the user guide for more details.

Is this faq useful?
Your feedback helps improve this site.

Any other feedback?

How can we improve it?

Thank you
We appreciate your feedback.
Click here to contact TP-Link technical support.

Sours: https://www.tp-link.com/us/support/faq/2648/

Similar news:

He did something well for me, but I don't want to remember about it. Oops, I did it, I didn't tell you anything. He bit me. The cunning guy.



4010 4011 4012 4013 4014