Quilt in the hoop patterns

Quilt in the hoop patterns DEFAULT
blcsewing
In-the-Hoop Quilt Blocks I Embroidery Designs Quilt Block Patterns, Pattern Blocks, Quilt Blocks, Embroidery Supplies, Embroidery Designs, Nancy Notions, Flying Geese, Machine Embroidery, Patches
Sewing supplies, quilting supplies, embroidery designs
DEAL! In-the-Hoop Quilt Blocks $40 Embroidery Designs - Special Use - Embroidery Designs - Nancy's Notions. 20 classic quilt block patterns in three sizes: 5", 6" and 8" for a total of 60 designs including log cabin, crazy patch, rainbow, square on square, heart, monkey wrench, flying geese, fence posts, snowball basket, economy, roman stripe, pineapple, windowpane string, Amish square, water lily, fancy square, window, and ring.
Sours: https://www.pinterest.com/blcsewing/quilting-in-the-hoop/

Used Products

Endless Embroidery

Finished size approximately 38” x 38”

I just finished this small quilt project completely on my BERNINA 880 PLUS, from the piecing to the quilting. Yes, you can use your home embroidery machine to quilt large and small projects—it is ABSOLUTELY possible!

Many refer to this process as “quilting in the hoop”. I found some great quilting designs from OESD’s large selection of continuous quilting designs to create edge-to-edge quilting on this fun quilt project. By linking the designs together, this creates the continuous embroidery. The design I used was from the BERNINA Exclusive Design Collection Quilting by Design by Jessica Schick #80196. There are about fifty edge-to-edge continuous quilting designs in this collection that work perfectly with an embroidery machine.

My BERNINA embroidery machine has the Endless Embroidery feature to set up the design and stitch reference points that made it easier to line up the continuous designs in the multiple hoopings needed to complete the quilting on this small quilt. So, I thought I would share the process by giving you some step-by-steps to help you be successful in creating edge-to-edge quilting. I have also included some tips on how to keep the back of the quilt as pretty as the quilt top.

Supplies

  • Fabric for quilt top:
  • 16 – 10 inch squares of fabrics (Pre-cut 10” squares were used for sample)
  • 8 light squares
  • 8 medium to dark squares
  • Fabric for backing
  • 1 1/4 yards 45” wide fabric
  • Batting
  • 1 1/4 yards 45” wide batting
  • Thread for piecing: Mettler Silk Finish Cotton 50 weight
  • Thread for quilting: Isacord 40 Embroidery Thread in needle and bobbin
  • 505 Temporary Spray Adhesive (optional)
  • Removable marking pen (Dritz Quilting Heat Erase Pen was used in sample)
  • Double-sided Adhesive Tape-1/4-inch wide (Wash-Away Wonder Tape was used)
  • Scissors
  • OESD Design Collection #80196 Quilting by Design with Jessica Schick (Design #80196-26)
  • Drop-Shaped Embroidery Foot #26
  • 9 mm Patchwork Foot #97/97D
  • BERNINA Maxi Hoop
  • BERNINA 880 PLUS (I used the B 880 PLUS, but the Maxi Hoop is compatible with the B 790 PLUS  and B 700 embroidery machines also. All three machines include Endless Embroidery and Pinpoint Placement features needed for this project)
  • BERNINA Embroidery Software 8.1, ARTlink 8 or other software capable of printing templates

NOTE: BERNINA ARTlink 8 is a free downloadable software program with the capabilities required for this project.

Preparing the Quilt Top

Attach the Patchwork Foot #97/97D to the machine. If attaching #97D, remember to engage the BERNINA Dual Feed Mechanism.

Stitch the sixteen 10-inch fabric squares together using a 1/4” seam allowance. There are 8 light squares and 8 medium to dark squares; arrange as desired. I have alternated the light and darks in my block layout.

Endless_Embroidery_pieced_quilt

Cut the backing fabric 45” x 45”. The backing is cut larger than the quilt top to allow for the shrinkage that happens as you quilt, but it will also give extra fabric needed when hooping the layers during the quilting process.

Cut the batting 45” x 45”.

To Prepare the Quilt for Stitching

Place the quilt back wrong side up on a flat surface, position the batting on top of the backing fabric. Then center the quilt top right side up over the batting. There should be an equal amount of backing and batting around all four sides of the quilt top fabric.

Lightly spray baste each layer with temporary adhesive spray. This is an optional step, but it will help to keep layers from shifting during handling and embroidery.

Endless_Embroidery_layer_baste_quilt

Print Design Template

In BERNINA Embroidery Software V8.1, BERNINA ARTlink 8 or software with capability to print a template, select File > Open and navigate to the location of the design. Select design #80196-26 and select Open. (Note: the following screen captures are from Embroidery Software 8.1, but steps will be similar if using ARTlink 8.)

Endless_Embroidery_03_open_design_BERNINA_WeAllSew_Blog_1200x638px.png

Right click on the Hoop Menu (1) and select the Maxi Hoop (2).

Endless_Embroidery_open_design

With the design selected on screen, click on Rotate Right 45° twice to rotate the design 90 degrees.

Endless_Embroidery_rotate_design_90_degrees

Click on Copy; then click Paste to create a duplicate. Move the pasted copy below the original.

Endless_Embroidery_copy_paste_design_move_downg

Move the duplicate design into position by aligning the start point of the duplicate with the end point of the first design.

Endless_Embroidery_move_design_align_end_point_start_point

To print design templates, click on Print Preview.

Endless_Embroidery_design_ready_select_print_preview

Click on Print Now.

Endless_Embroidery_print_design_template

Print two design templates; one we will trim—this will help determine spacing of the edge to edge rows of quilting in the hoop. Printed templates are very helpful to give you a visual of the design and help determine spacing for the marked reference lines.

Endless_embroidery_trim_template

Mark the Quilt Top

Using a quilter’s ruler and a removable marking pen, mark a line 4 inches from the right edge of the quilt top. This will provide a straight line as a reference to assist in the vertical design placement of the first row of edge to edge stitching.

Endless_embroidery_mark_vertical_lines_placement

Hoop the Quilt

Cut 2 pieces of double-sided adhesive tape about 1” in length and 2 pieces about 3” in length. The 1” pieces will be for the top and bottom of the hoop’s inner ring and the longer 3” pieces will be for the sides. Peel paper away from one side and attach to the wrong-side edge of the inner hoop, then peel off other side of paper. The sticky surface will help keep the inner hoop from sliding when hooping the quilt sandwich.

Endless_Embroidery_double_sided_tape_inner_hoop

Endless_embroidery_remove_paper_double_sided_tape_inner_hoop

Place the hoop template into the inner ring of the hoop. Place the inner ring at the top right edge of the quilt; align the vertical center of the hoop with the line marked on the quilt top; the top of the quilt is approximately 2 grids down from top of the markings on hoop template. When the inner hoop is in position, press firmly on the areas of the hoop with the double-sided adhesive tape to adhere the inner ring to the quilt sandwich.

Endless_embroidery_insert_template_inner_hoop_placement

Slide the outer ring of the hoop under inner ring under the quilt sandwich. Insert the inner ring into the outer ring. Tighten the hoop.

Endless_Embroidery_place_inner_hoop_outer_hoop_placement

At The Machine

Prepare the BERNINA machine for embroidery. Insert the Quilting by Design USB stick into the machine.

Open the design file (#80196-26) from the USB stick.

Touch the Hoop Indicator/Select Hoop icon.

Endless_Embroidery_open_design

Select the Maxi Hoop and touch both the Grid and Hoop Center icons. Touch Close (x) to exit the display.

Endless_embroidery_hoop_menu_select_maxi_hoop

Touch the Information (“i”) icon (1); touch Rotate Motif (2).

Endless_Embroidery_touch_information_Rotate_design

Touch Quick Rotate 90°.

Endless_Embroidery_rotate_quick_90_degrees

Touch the “i” in the breadcrumb path to return to the Information display.

Touch Endless Embroidery.

Endless_Embroidery_touch_endless_embroidery

The function will automatically add another design to the hoop, so now there are two designs that fit perfectly in the Mega Hoop at the desired size.

Touch the Decreasing space between motifs in the Endless Embroidery, touch the (–) icon. This will decrease spacing between the designs.

Endless_Embroidery_decrease_space_touch_minus_button

Decrease the space to approximately -23.6 mm.

Endless_Embroidery_select_all_bottom_reference_points

The default reference points are the lower left and right arrows highlighted in yellow. (This can be changed, or you may select additional registration marks to stitch out for aid in positioning. They may also be deselected and not used at all.)

Keep the default reference points (yellow arrows) selected and touch the center bottom reference point (arrow), there are now three reference points (yellow arrows) selected to stitch with the design.

Touch Confirm (green check) to save changes and close the Endless Embroidery window.

Endless_Embroidery_select_all_bottom_reference_points

Attach the hoop to the machine.

Design Placement With Pinpoint Placement

It’s time to make sure that the placement of the design will be in line with the placement marks on the hooped project.

Touch the Pinpoint Placement icon.

Endless_Embroidery_touch_pinpoint_placement

Touch Grid placement icon.

Endless_Embroidery_touch_grid_top_center_dot

Touch the top center positioning dot on the design. The point will change to a darker color and is now active; the machine will move so the needle is now over the area of the hooped fabric that is displayed on the screen of the machine.

Endless_Embroidery_move_marked_line_touch_set

Use the Upper and/or Lower Multi-function knobs to position the needle directly over the marked line on the project. Use the handwheel to lower the needle to check the placement. Raise the needle back to the highest point after you have finished checking.

Endless_Embroidery_top_dot_placement_machine

On the screen of the machine, touch Set to confirm the position. You will see that the dot now has a yellow highlight around it.

Touch the lower center dot. If needed, use the only the upper Multi-function knob to position the needle over the drawn line.

Endless_Embroidery_lower_dot_placement_machine

Touch Set to confirm placement. You will see that the dot now has a yellow highlight around it. Touch Close the exit the Information display.

Endless_Embroidery_touch_lower_center_dot_move_touch_set

The design is ready to stitch. Touch OK (needle icon) to open Embroidery Display

Since this is a continuous quilting design, we do not want the cut connecting stitches.

Touch the Cutting Connecting Stitches icon to deactivate the thread cutter; it is no longer highlighted in yellow.

Endless_Embroidery_embroidery_display_turn_off_thread_cutter

Touch Color Resequence to activate, it is now highlighted in yellow. This will keep the machine stitching with like colors.

Endless_Embroidery_touch_color_resequence

Turn Off Thread Away

Before you begin stitching, if you are embroidering with B 880 PLUS, 790 PLUS, 700, 590, 500, you will need to make sure that the Thread Away feature is deactivated.

Touch the Setup icon. (This is the gear symbol found to the right of the screen or found under Home > Setup. Consult you manual for details.) Touch Embroidery Settings (hoop) icon. Touch the Thread Away icon.

Endless_Embroidery_embroidery_settings_thread_away

Touch the slider and deactivate the feature (red O) (1). Touch Close (2) to exit the display.

Endless_Embroidery_turn_off_thread_away

Stitching the design

Drop the needle and pull up the bobbin thread. Pull the threads to the side. They may be clipped after the embroidery begins or left intact and later pulled between the layers of the quilt. These designs include a locking stitch at the beginning and end of the design. This prevents the back of the quilt from having unsightly thread tails.

Endless_embroidery_pull_up_bobbin_thread_first

Stitch the design including the 3 registration arrows at the end.

Re-hoop for Endless Embroidery

The first hooping stitch out is complete after you have stitched the 3 arrows at the bottom of the design.

Endless_Embroidery_hooping_one_complete

The machine screen displays the stitching option for Endless Embroidery, leave the machine at this screen until you have hooped for the stitch out #2.

Endless_Embroidery_endless_embroidery_screen_machine

Prepare the hoop for stitch out #2.

Trim away the thread tails, or you may choose to knot knot and bury between the quilt layers, a method used by many machine quilters.

Un-hoop the project gently to avoid disrupting the quilt sandwich and stitched registration marks.

Using the hoop’s plastic template and the marked placement line as guides, re-position the inner ring of the hoop. The stitched reference points (3 arrows) must be within the stitching area.

Endless_Embroidery_stitched_reference_points_in_stitchin_area

Carefully align the center vertical marking on the project with the hoop template’s vertical center.

Endless_Embroidery_rehoop_line_up_vertical_marks

Check to be sure you have aligned the center vertical mark of the hoop template with the marked line on the quilt so that the stitching will be straight.

Attach the hoop to the machine.

At The Machine

Touch Endless Embroidery on the machine screen.

Endless_Embroidery_endless_embroidery_screen_machine

Touch the green check to confirm that you have re-hooped the quilt project.

Endless_Embroidery_green_check_yes_re-hoop

The hoop is moved near the last stitch. The Auto-point is the tip of the center stitched reference point.

Use the Upper and/or Lower Multi-function knobs to position the needle directly at the tip of the stitched center arrow. Use the handwheel to lower the needle to check for precise alignment and then return needle to the highest point.

Endless_Embroidery_moves _to_last_stitch_auto-point_multifunction_knobs

Touch the upper right arrow and upper left arrow on the machine screen to align the left and right stitched reference points. Follow the same process as above to align needle point with stitched registration mark. Touch the green check to Confirm.

Note: Pinpoint Placement may also be used here to confirm that the quilt is hooped straight vertically if in doubt. Follow the steps above for using the Grid Placement to align with the marked line on the quilt sandwich.

Pull up the bobbin thread and pull the threads to the side. Stitch the design.

After the stitching is complete continue with the same process to complete the first edge to edge row of stitching.

Endless_Embroidery_row_one_complete_edge_to_edge

Edge To Edge Row 2

Remove the quilt from the hoop.

Position the trimmed design template on the quilt using the previously stitched row as reference for placement. Nestle the design template close to the previously stitched design so that there is not a large space between them. Measure from the edge of the stitched row to the vertical center of the design template, this will determine where you will mark the next vertical placement line on the quilt.

Endless_Embroidery_placement_line_nest_edge_to_edge

For the design I used it worked great to mark a vertical line that is approximately 2 3/4″ from the edge of the previous stitched row.

Endless_Embroidery_mark_vertical_placement_line

Hoop following the same process as in row 1, use Pinpoint Placement to place the first hooping of the design. Stitch the first design and then follow the steps for Endless Embroidery as used for the other designs in row 1.

Endless_Embroidery_continue_stitching_follow_steps

Follow this process until all the rows are stitched and you have now completed your Edge to Edge quilting in the Hoop!

Endless_Embroidery_all_rows_stitched_edge_to_edge_quilting

Finish The Quilt

Prepare the quilt for binding, trim off the excess backing and batting.

Prepare and stitch the binding. For more information on binding refer to early blog posts.

Binding Tips and Techniques

Binding 3 Ways 

Endless_Embroidery_finishing_binding

Yes, you can quilt in the machine embroidery hoop, edge to edge with Endless Embroidery!

Endless_Embroidery_finished_edge_to_edge_quilting_in_the_hoop

Endless_Embroidery_completed_quilt

Sours: https://weallsew.com/edge-to-edge-quilting-in-the-embroidery-hoop/
  1. State and capital quiz online
  2. Average weight for men uk
  3. Kc 10 air refueling
  4. Metro north jobs indeed
  5. Pure leaf raspberry tea shortage

How to quilt in the hoop with your embroidery machine

Did you know over one-third of quilters own an embroidery machine, and about one-third also do embroidery on quilt tops?

Your embroidery machine can now do much more than just embroidering.

53916255_2279923588996330_6683978438480494592_n

With our ‘in the hoop’ quilt designs you can easily piece blocks, embellish them with embroidery and even quilt them right in the hoop!

 

Here is how simple it is to make your own beautiful quilt that will WOW your friends and family

 

1. Hoop a stabiliser like No-Show Mesh for the base of your ‘in the hoop’ embroidered quilt block . More about stabilisers here

 

2. Load the quilt design onto your embroidery machine

blog 1

How to download the files and load onto your machine

 

3. Stitch down the batting – this is done automatically by your embroidery machine at the push of a button.

blog 2

We recommend that after this step that you trim the batting so no batting is in the seam, making the blocks easier to join later.

blog 3

Remove the hoop from your machine and trim the batting about 1-2mm from the stitching. LEAVE YOUR WORK IN THE HOOP WHILE YOU DO THIS .

4. The next step stitches the block fabric down onto the batting and stabiliser. Once again this is done automatically at the press of a button.

blog 4
blog 5

 

5. Now the FUN part begins!

This is the part where the applique and decorative stitching is done

  • machine will stitch a placement line for the applique
  • lay applique fabric over placement line making sure the line is covered.
  • stitch down the applique fabric
  • trim the applique fabric as close as you can to the stitching line
  • machine will then stitch all the quilting, satin stitching and decorative stitching

The above steps are all done automatically by the machine. The machine will automatically stop when there is something you need to do like change thread colour or add more applique.You just follow along with the instructions that we provide.

After you have made the all the quilt blocks you make the border and corner blocks in exactly the same way.

 

blog 13
blog 14

 

6. Assembly of the quilt

Now that you have made all the quilt blocks on your embroidery machine it is now time to assemble your quilt.

We also provide all the instructions you need to sew the blocks together, add the binding and the backing with stitching in the ditch.

 

IMG_20180503_101546

Designer Cathedral Windows Quilt 4x4 5x5 6x6 7x7 in the hoop

Introducing the Designer Cathedral Windows Quilt ITH In the hoop machine embroidery design. Sew each block in the 4×4, 5×5, 6×6 or 7×7 hoops.

The finished sizes can be completely dependent on how many blocks you use and the borders you add.  Each block is made individually in the hoop.

You could completely change the look of this quilt by changing the fabric. We used the Bird Pond range from Tilda to achieve our look!

Full photo instructions and  directions are included with your purchase.

It is our intention to offer you the best service always and for our designs to be the highest quality in the market.

Designs come in all formats except ART. Bernina’s can use EXP. Formats pes, hus, sew, xxx, jef, vp3, vip, mit, dat, dst, exp etc. All formats are included with your purchase.

SVG and FCM files are included for the Silhouette and Scan n Cut machines.

More quilt designs from Sweet Pea

 

Monochrome 4x4 5x5 6x6 7x7 in the hoop

 

Pretty as a flower quilt 5x7 6x10 7x12 in the hoop
Medallion Quilt Full 4x4 5x5 6x6 7x7 in the hoop
Mandala Slice Quilt 4x4 5x5 6x6 7x7 in the hoop

Sweet Pea Machine Embroidery designs- The Quilt design Collection

 

Related articles

Like this:

LikeLoading...

Sours: https://swpea.me/2019/03/16/how-to-quilt-in-the-hoop-with-your-embroidery-machine/
Quilting in the Hoop on my Baby Lock Solaris using IQ Designer and the Decorative Fill Designs

Already a month. Serega swallowed. And then he closed his eyes and brought his lips to mine. And I, of course, kissed him.

In patterns quilt the hoop

The bearded man wrapped his arms around Irina's slender waist, and they began to sway to the beat of the music. His wife pressed her whole body to him and kissed him right on the lips. Obviously encouraged by such a quick success, the man immediately gave free rein to his hands, and began to gently stroke Irina's.

Elastic buttocks.

BERNINA Quilting In The Hoop

Don't be so, please Nikolay asked you for such excellent sissy, don't hide them, please. Natasha looked at the man, puzzled. He looked probably a little over fifty, short, with a big tummy, absolutely not athletic, already graying and balding. Are you jerking yourself off too.

Similar news:

Decided to try. disgusting, of course, it was - well, do bullies. and after all, the goat did not even warn him - he finished in his mouth. shit, I almost vomited. how would they piss in your mouth.



5059 5060 5061 5062 5063