How to install dlink router

How to install dlink router DEFAULT

How To Set Up Your D-Link Cloud Router

So, you just purchased a D-Link router and now you’re ready to get your fast Wi-Fi up and running. Thanks to D-Link’s Quick Router Setup process, it should be a piece of cake. But just in case you’d like some extra help, this blog explains the entire process and even provides links to helpful resources.

What You Should Expect to See in the Box

Although older devices may include a setup wizard CD instead of a Wi-Fi configuration card, your box should include:

  • Router
  • Power adapter
  • Ethernet cable
  • Wi-Fi Configuration Card
  • Quick Install Guide

Before you Begin

  • Users with DSL providers – If you are using a PPPoE connection, you will need your PPPoE username and password. If you do not have this information, contact your Internet service provider (ISP). Do not proceed until you have this information.
  • Users with Cable providers – Make sure you unplug the power to your modem. In some cases, you may need to turn it off for up to 5 minutes.
  • Users with a Modem/Router Combo – If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so your D-Link router can work properly. Please contact your ISP or refer to the user manual for your modem/router device.

Quick Setup Instructions

Step 1: Connect the included power adapter to a wall socket and your router

Step 2: Connect the Ethernet cable to the WAN (or internet) port of both your modem and router, connecting the two. (WAN ports are normally yellow)

Step 3: Give it a moment to start up with a light indication

Step 4: Head to your computer or mobile device

Step 5: Look in your network preferences and connect to the Wi-Fi Name (SSID) found on the provided Wireless Configuration Card and enter in the password also listed on the card.

Congratulations! You’re connected!

Is The Quick Setup Not Cutting It? Let’s Delve Deeper… 

Step 1:Unplug the Power to your Cable/DSL Internet Modem

Step 2:Connect an Ethernet cable from your computer/laptop to a LAN port (Port 1,2,3 or 4) on your router

Step 3: Connect your Cable/DSL modem to the Internet Port on your router

Step 4: Power on both the router and your Internet Cable/DSL Modem

Step 5: Open your Internet browser (Internet Explorer/Firefox) and enter the address bar.
setup wizard

Step 6: You should be prompted with the D-Link Quick Router Setup Wizard, Click Next to Begin.

Note:This wizard will only appear at the first configuration. If your router has been configured previously, you will need to reset it to go through the setup. To reset your device to default settings, press and hold the reset button (on the back of the router) for 10 seconds and release. The lights on the front of the router should all flash and reboot. – Return to step 5

  • The Router will perform a scan to determine the type of internet service you have. If successful, the Internet Setup will be skipped.
  • If the scan was not successful, you will be prompted to select your Internet Type:
    • DHCP Connection (Dynamic IP Address) – Cable Internet Service (Rogers,Shaw,Cogeco, Videotron, Teksavvy)
    • Username / Password (PPPoE) – DSL Internet Service (Bell Sympatico, Teksavvy DSL, Sasktel, Acanac)
      • Username: Your Internet username (Provided by your Internet Service Provider)
      • Password: Your Internet Password (Provided by your Internet Service Provider)
        config page 3config page 4
  • Next is your Wireless Settings. Enter a New Wireless Network Name and Password. This password is what you will need when connecting to your wireless signal for the first time.
    config page 5
  • Enter a password for your router. This password is needed when you want to log into the router configuration setup page.
    • Note: This is not your wireless password
      config page 6
  • Select your Time Zone.
    config page 7
  • A summary of your wireless settings is displayed. This includes your wireless network name and your wireless password. Click Save.
    config page 8
  • The router will now reboot to apply your new settings and the setup is complete.
    config page 9

If you still need additional assistance, please visit to get started on a support path to get things up and running. 

Share Tweet

How to Set Up a D-Link Router

Authored by: Tech Pro Team
This Guided Path® was written and reviewed by’s Tech Pro team. With decades of experience, our Tech Pros are passionate about making technology work for you. We love feedback! Let us know what you think about this Guided Path® by rating it at the end.


A router is a box that allows multiple computers, smartphones, and so on to join the same network. From there, the router is typically connected to a modem in order to provide an Internet connection to any device that is connected to the router. This guide aims to help you through the first time setup process for your router.

In the box you may have some of the following:

  • The router's power supply or charger.
  • Device manual.
  • Driver disc (for some models).
  • USB cable (for some models).
  • Network cable (for some models).

1 Connect Power

Please ensure that you are using the power adapter that came with your router.

  1. Locate the power cable and connect it to a power source like an outlet or surge protector.
  2. Plug the other end of the power cable to the router's power input, which is typically located in the rear.Unplug power cable from rear of router, then plug it back in.
  3. Your router should power on.

2 Connect to Modem by Cable/Wire

Your router must be connected to a modem in order to provide the local network with an Internet connection.
  1. Acquire an Ethernet cable.
    Ethernet cable.

  2. Take one end of the cable and plug it into the Internet (or WAN) port on the rear of your router. The port may be blue or grey.
    Router Internet port.

  3. Take one end of the cable and plug it into an available Ethernet (or LAN) port on the rear of your modem. These ports are typically yellow.
    Modem Ethernet ports.

  4. Usually this is all that is needed to connect your router to a wired connection.

3 Login

  1. Using a computer that is connected to the D-Link router, open a web browser such as Internet Explorer, Mozilla Firefox or Google Chrome.
  2. Enter one of the following addresses into your browser address bar:
    • http://dlinkrouter.local

  3. When prompted, enter the credentials to log into the router.

    For DIR-xxx routers, the default credentials are:

    • Username: admin
    • Password: no password

    For DSR-xxx routers, the default credentials are:

    • Username: admin
    • Password: admin

? What is the color of your router's user interface?

  1. White and Blue (New Version)
  2. Blak and Orange (Old Version)
  1. 2016 polaris snowmobile for sale
  2. Try on clothes in spanish
  3. Palantir stock lockup expiration date

8. If the disconnected network hardware window displays, select Ignore disconnected network hardware and click Next. [Show Me]

9. Select Other as the Internet connection method and click Next

10. Select This computer connects directly to the Internet. I do not have a network yet as the specific Internet connection method and click Next.

11. Enter a description in the Computer description field for the computer you are connecting to the gateway. It should be a description that differentiates it from the other computers that will be on the network (For example, office desktop). 

12. Enter a name for this computer in the Computer name field. The name cannot contain any spaces or special characters. 

Note: The name cannot contain spaces or special characters.

13. Enter a name for your network workgroup in the Workgroup name field and click Next. All computers connected to your network must be assigned to the same workgroup.

Note : The workgroup name cannot contain any spaces or special characters.

14. Verify the network settings you have entered and click Next.

15. Select Create a Network Setup Disk and click Next. [Show Me]

16. Select the drive where you want to save the information from the options displayed and click Next. [Show Me]

17.  Follow the directions for the type of drive you selected and click Next.

18. Review the instructions for using the setup disk.

Dlink wifi router : Wireless Broadband Routers: wireless router setup (Tutorial)

In this article, we are going to setup our D-Link router. Now we are not only focussing on connecting to the internet, but also on some other important settings. Think of securing your WiFi, using the right DNS servers to speed up your internet connection and creating a guest WiFi network.

Getting started

Before we can connect our D-Link router to the internet we need to figure out how we can connect it. The D-Link router is a router and modem, so it can make the connection to your ISP itself, but we need to know how the internet is provided by your ISP.

  • DSL users without modem – If you have a DSL connection and your ISP hasn’t provided a modem, then we need to use PPPoE to connect the D-Link router. Check if your ISP has provided you with the PPPoE credentials, you will need this to connect the router to the internet.
  • DSL users with modem/router combo – It’s best to use PPPoE, so check if your ISP has provided you with the PPPoE credentials or request them. If they don’t support a custom router (like here in The Netherlands), then we are going to place the D-Link router behind the modem/router from the ISP. We need to set the router in Bridge or DMZ mode.
  • Cable/Fiber users – If you have only a modem, then we can connect the D-LINK router behind it. You might have to reboot the modem after you connected the D-Link router. If you have a modem/router combo then you will need to set in the Bridge or DMZ mode.

Difference between modem and modem/router combo

The difference between a modem and a modem/router is that a modem only makes the connection to the internet. Where a router connects all the device together so you can print on your network printers, share files between computers and use the internet connection. Most consumer routers also provide WiFi and they have multiple ethernet ports (RJ45). A modem only has one ethernet port that you use to connect a router behind it.

Setting your router in bridge or DMZ mode

If your ISP doesn’t provide you with the PPPoE credentials, then we need to set your current router in bridge mode. In bridge mode, your router won’t route anymore, but it will essentially be a dumb switch. It passes on the internet connection through to a LAN port.

How you set your router in bridge mode is different for each router. So the best thing is to look up the user manual. But in general, you can follow these steps:

  1. Find your routers IP address
    1. Click on Start and type CMD <enter>
    2. In the black dos box, type ipconfig <enter>
    3. Note your default gateway address
  2. Visit the router’s ip address in a new browser tab. ( in my case
  3. Look for the internet settings page
  4. Find the Enable Bridge mode or Enable DMZ mode

Setting up a D-Link Router

We have done all the prerequisites, so we can now start with actually setting up the D-Link router. I assume your connected the router and put the internet connection in the WAN port and connected your computer with one of the LAN ports.

1. Open the router in a new browser tab

Open your browser and navigate to, the default IP address of the D-Link router.

2. Enter the D-Link router password

The default router password of a D-Link router is nothing (blank). The default username is Admin. After you are logged in the Internet Connection Wizard will show. The wizard will only open the first time your login. If you don’t get the setup wizard, then click on Internet Connection Setup Wizard in the centre of the page

3. Setup a strong password

First, we are going to change the default password. Enter a strong password (at least 8 characters) to secure your router. Click on next when done

4. Select your Timezone

A pretty simple one, select your time zone. Nothing to explain here…

5. Configure your internet connection

The most important step, we are going to configure the internet connection. Now, it depends on how you can connect to the internet what you are going to select here. The two most options are:

  • DHCP Connection. Use this when you have a modem from your ISP. Just select DHCP and click next.
    You don’t need to enter the MAC Address or enter a hostname. We will configure the DNS later, just click next.
  • Username / Password Connection (PPPoE)
    If you have the PPPoE credentials from your ISP then select this option.
    Enter the credentials and click on next.

When done click on Connect. It may take a few seconds to connect, but you should now have an internet connection.

WiFi setup on D-Link Router

Our D-Link router is now connected to the internet, but we also want to set up our wireless network. By default, your router will have a wireless network that you can connect to. You will find these details on the bottom of the router.

But leaving things default is never a good idea, so we a going to change our wireless network name, pick a new password, optimize our wifi signal and disable the Wifi protected setup (because these are to easy to hack).

1.  Open the Wireless network setup

We won’t be using the wizard, so on the setup page of your D-Link router, select Wireless settings on the left side and then Manual Wireless Connection Setup.

2. Configuring the 2.4Ghz band

  • Change the Wireless Network Name to something you like
  • Keep the mode on Mixed 802.11n, 802.11g and 802.11b. This way all wireless devices can connect to the router
  • Enable auto scan, this way the router will find the least crowded wifi channel
  • Channel width, an important one. If you live in an area with a lot of wireless devices around you (like an apartment building), then you need to changes the channel width to 20Mhz. Narrowing down the bandwidth will give your less interference and resulting in a better and faster wifi connection.
    If you live in a not so crowded area, then leave it on 20/40Mhz. This will give you to most speed and maximum distance.
  • Scroll down to Pre-Shared key, fill in a new password for your wifi. Use the same password of both wifi networks (2.4ghz and 5ghz)

3. Configure the 5Ghz band

Use the same settings as for the 2.4Ghz band. Only add 5Ghz to the wireless network name.

For the channel width, again if you live in a crowded area, lower the channel width. For 5Ghz, you should lower it to 20/40Mhz.

When done save the settings, if you were connected wirelessly to your router then you will have to reconnect to the new Wifi network.

4. Disable WPS (Wifi Protected Setup)

WPS is an easy way to connect a device to your wireless network. You can connect/pair a device by pressing a button on the router or enter a pin code. Now the pin code is where the vulnerability is. A pin code is really easy to crack, so it’s really recommended to disable WPS at all for your router.

  1. Click on Advanced
  2. Select WI-FI Protected Setup on the left side
  3. Disable it

Creating a Guest Wifi Network

The D-Link router supports a guest wifi network. This way you can give your guests internet access without letting them on your private home network. The guest network is a separate Wifi network with its own wireless network name and password. Enabling it on a D-Link router is pretty easy.

  1. Go to the Advanced page
  2. Select Guest zone on the left side
  3. Enable Guest Zone for the Session 2.4Ghz
  4. Enter a Wireless Network Name for your guests
  5. Set the security mode to WPA-Personal. Never leave your guest wifi on-secured, otherwise, everybody can use your internet connection.
  6. Scroll down to Pre-Shared key and make a strong but easy to remember password for your guest.
  7. Click on Save Settings

You will now see an extra wifi network in your house. you can also create a 5Ghz guest wifi network, but that isn’t really necessary in most cases.

Speeding up your internet with the fastest DNS Server

During the internet connection setup, we skipped the DNS part. A DNS server is the dictionary of the internet. Almost everything we do with the internet requires a DNS server to translate a domain like to an IP address. And because nearly everything you do requires a DNS server, selecting the fastest one will accelerate pretty much everything you do online. Your ISP also has a DNS server and those are in most of the case, not the fastest servers. So using another one can speed up your internet with more than 30% easily.

Now there is also another important reason to pick a different DNS server. The company the runs the DNS server can see every site you visite. Some company even sell this data to advertisers.

The fastest DNS server available today is You don’t have to take my word for it, but the independent DNS monitor DNSPerf ranks as the fastest server in the world.

Changing the DNS server

To change the DNS server on your D-Link router is pretty simple.

  1. Go to the Setup page and select Internet on the left side
  2. Choose Manual Internet Connection Setup
  3. Change the Primary DNS Server to
  4. Change the Secondary DNS Server to
  5. Click on Save Settings

You will need to restart your computer to apply the changes to your computer too. Or a little bit faster is to reconnect the Wifi network or the unplug and replug the network cable in your computer.

Prioritize Network Traffic with QoS

To speed up your internet connection we can also prioritize important network traffic. In a household your share your connection with all the members in your household. If somebody is watching Netflix while another is downloading the latest game on Steam you might notice that Netflix will need to buffer or lower the video quality. This happens because the download is consuming almost all the bandwidth that is available.

By prioritizing the network traffic we can tell the router to handle the video stream or gaming traffic first. This way you won’t suffer from any lag during your online gameplay or while watching a movie.

You can enable QoS as followed:

  1. Go to Advanced
  2. Select QoS Engine on the left side
  3. Enable QoS
  4. Set your Uplink and Download speed
    This must be the speed of your internet connection.
  5. Select Strict Priority Queue
  6. By default, there are already some rule created

The default rules are in basic fine, but if you have a game console and you play online then you might want to prioritize all the traffic from the console. You can do this by creating a new rule.

  1. Name the rule PS4 for example
  2. Queue ID is 1 – Highest
  3. Protocol is ALL
  4. Local IP Range is the IP address of your console. (Look it up at the status page of the D-Link router or in your console under network settings)

Last Tips

We have set up our D-Link router and it’s ready to be used. There a few last tips / commenly asked questions that I would like to mention

Back a backup of the configuration

After you configured your router is it always a good habit to make a backup of the configuration. With a backup, you can easily restore your router if you have to reset the router or when it lost the configuration due to a power outage.

  1. Go to Tools and select System on the left side
  2. Click Save Configuration
  3. Store the config.bin file somewhere save

Update the firmware

Something you should actually start with, but the most convenient way to update the firmware requires an internet connection. New firmware version contains bug fixes, security updates and may even have performance updates for your router. Before you update the firmware, always make a backup of the configuration.

  1. Go to Tools and select Firmware on the left side
  2. Click on Check now
  3. Update the firmware.

Reset D-Link Router Password

If you lost your password of the D-Link router the only option is to factory reset your router.

  1. Power on the D-Link router
  2. Hold the reset button for atleast 10 seconds with a paperclip
  3. Wait 15 second until the router is restarted
  4. The default login is Admin with no (blank) password 

Other articles you may like:

Tags GuideHome NetworkSours:

Dlink router to install how

Hello everyone

Welcome to

Today in this post we help you learn how to setup a Dlink wireless router with your internet Modem. we have Gathered all the needful information & easy methods so you can install the Dlink router without any trouble. Please read the post till last and Get it configured.

Now some of the information you need first hand before starting the installation process- 

  • Internet Modem with an active internet connection.
  • Computer or smartphone with Full Browser.
  • an extra internet cable in case you want a Cable setup.
  • power source to power router and modem.

Table Of Contents

Setup Dlink router in easy steps-

connect the modem with the router using the internet cable. cable should be connected worm Wan port of the Modem to internet port of Dlink wifi router.

Connect Computer with the router using the internet cable Or You can Connect with Dlink router using the dlink wifi network. Go to your computer and refresh the network and see a new dlink wifi network. Connect with it then follow the steps further.

  1. Open any web browser on your computer.
  2. Enter into the address bar.
  3. Enter “admin” as the User Name, and leave the Password field blank.
  4. Click the “Setup Wizard” button.
  5. Click the “Launch Internet Connection Setup Wizard” button.
  6. Create an administrator password.

7- Set your time zone.


8- Select your internet connection type. (Most home users who connect via cable or DSL will select the first option (“DHCP Connection”)


9- Click the “Clone Your PC MAC Address” (if empty).
10- Save your settings. Click the “Connect” button to save your settings. your router will reboot, which may take one to two minutes.
now you are connected with network Test the connection.,

Creating a Wireless Network

1- Log into your router. Enter into the browser window of a computer connected to the router via Ethernet.
2- Click the “Setup” tab.

3- Click the “Wireless Settings” menu in the left frame.
4- Check the “Enable Wireless” box.

5- Enter a name for the network. Give your network a name,

6- Select “WPA2” as the “Security Mode”.
7- Create a strong password and please remember it or wrote it down somewhere because you will need it after setup.

8- Click the “Save Settings” button.

9- restart the router after setup the Dlink router and wait for 1 min.

Now your wireless network is active, you can connect you all devices to a wireless network.

Troubleshoot dlink router setup

  • you can setup a Dlink router just by connecting with a modem with an ethernet cable.
  • we always recommend resetting the dlink router if it is the old router.
  • Reset dlink router and get it setup again.

😉 we hope this will help you setup a Dlink router. Please comment below and let us know if you need any other help.

🙂 Thanks for reading at

D LINK DIR-615 N300 ROUTER Unboxing \u0026 Full Setup Details

D-Link Router can be configured in just a few minutes and once you have configured the router and set it up, your Wi-Fi connection will set up and you will be able to connect to the internet through your D-Link Router.

Before proceeding, make sure the ethernet cable is attached to modem or an active data jack to the ethernet port in back of your router.

Follow these steps to set up your D-Link Router –

  1. Power on your D-Link Router.
  2. Connect your PC to the router using an Ethernet Cable or WiFi.
  3. Once your PC is connected, open a web browser and go to or (The default gateway address may vary from model to model, here is list of default router IP address).
  4. A login page will appear. The default username is admin and the password field is to be left blank. Click on Log In.
  5. Now, you can configure and set up your router using the Internet Connection Setup Wizard.
  6. Under Wireless Setup enter SSID (WiFi Name) and Key (Password).
  7. Under WAN Setup choose Connect type: DHCP/PPPoE/Static (You can ask your ISP about your internet connection and the required details).
  8. After you have configured your internet connection, you can then click on Save and Connect and the router will now connect to the Internet.
  9. You can then visit the Wireless Settings and set up your Wi-Fi Network including its SSID and password.
Posted on by Devin Router Setup.Sours:

You will also like:

Panties under the skirt were no less slippery, my hand slipped onto Lena's waist, dragging her skirt along and exposing my wife's hips above the knees. My first impulse was to straighten Lena's skirt, but then I noticed with what greedy eyes F was looking at my wife's slightly bare thighs, and then I realized that. The situation was turning me on.

I was damn pleased to see that a stranger was looking with lust at the slightly naked charms of his wife.

5409 5410 5411 5412 5413