Monitor not detecting pc hdmi

Monitor not detecting pc hdmi DEFAULT

Plug it in, switch it on—it sounds easy enough to get your PC running, but it isn’t always that easy. It doesn’t matter if your PC fans are spinning if you’re seeing nothing on your monitor that allows you to actually use it. A no signal error on a monitor can leave you scratching your head without answers.

Thankfully, this kind of problem is usually easy to troubleshoot. If some of the more common fixes don’t work, then it points to a likely hardware fault that you’ll need to investigate for repair or replacement. To help you deal with display issues, here are some troubleshooting tips you can try when your PC monitor has no signal.

Check Your Cabling and Power

Before you rush to rip out your graphics card or head to Amazon to buy a new monitor, you should look carefully at your PC and monitor to ensure you have no cabling or power issues.

This is a simple check to complete. Start by tracing the cabling between your monitor and PC to ensure that you have no loose connections. A loose HDMI cable, for instance, could be preventing the output from your PC from being displayed (and vice versa).

You may also find that the display cable itself is at fault. If you see cable damage, or if the cabling is quite old, swap it out for an alternative. This can sometimes immediately resolve any issue with your monitor display.

There could also be a power issue that prevents your monitor from working correctly. If your monitor is displaying a no signal error, then you can assume your monitor has power, but if your PC isn’t on, you won’t see any error displayed.

Is The Monitor Input Source Correct?

A no signal error on a monitor could be a sign that your PC monitor is ignoring the graphics output from your PC. This can sometimes happen if the input source on your monitor is set to the wrong device.

Most display monitors have multiple input sources available, including VGA, HDMI, and DVI inputs. This allows you to connect multiple devices to the same display. This could be several PCs, or a PC and a games console, which you could then switch between using your monitor’s firmware menu or physical controls.

If this is the case, make sure that the input source on your monitor is correctly set. If it isn’t, switch to the correct source (for example, HDMI or DVI for modern PCs) to get your monitor working again.

Check Monitor Resolution

A PC monitor has a set range of display resolutions that it can use to display your PC output. If your PC’s graphics card is set to a display resolution above what your monitor is capable of displaying, you’ll likely see a blank screen or a no signal message appear.

Thankfully, fixing a blank monitor screen after changing your display settings is an easy process. If the monitor has suddenly lost resolution after changing the settings yourself, wait 15 seconds—Windows will revert back to your previous resolution after this point.

If you’ve haven’t recently changed your display settings, then your monitor resolution could have been changed automatically. There are ways to get around this, including restarting Windows and booting into Safe Mode to bypass the issue with a higher resolution.

By default, Windows will use a much lower display resolution in Safe Mode than during normal use. This will allow you to change your standard display resolution to a lower setting that your monitor can support.

If you’re unsure what resolutions are supported by your monitor, you should consult your user manual or the manufacturer website to find out. Alternatively, use the 15-second window to change your resolution for a bit of a trial-and-error. If the resolution stops your monitor from working, Windows will revert the setting to the previous setting that worked.

Update Your Graphics Card Drivers

When a display problem occurs, the monitor itself can often be the focus of your diagnostic efforts, but the graphics card your PC uses is often the bigger culprit. If you’re seeing a blank screen on a new monitor, then it’s likely that a new graphics card driver is in order.

As we’ve explained above, your PC can sometimes use a resolution outside of the range supported by your monitor. Equally, your monitor can sometimes support resolutions that your graphics card doesn’t yet support, especially if you’re moving to a 4K monitor or from a 60Hz to a 240Hz display. 

Thankfully, this is often resolved by updating the graphics card drivers (so long as the graphics card is relatively new). It’s recommended that you update your drivers on a regular basis to gain access to new features and bug fixes. This includes support for new monitors and display resolutions.

For instance, if you have an NVIDIA graphics card, you can easily update your NVIDIA drivers using Windows Update or, for the latest drivers, by downloading them from the NVIDIA website directly.

Test With An Alternative Monitor Or PC

If you’re confident that there isn’t a software issue (like outdated drivers) causing no signal to your display, then you may need to try an alternative monitor or PC as part of your troubleshooting efforts.

Replace the monitor attached to your PC with a spare (if you have one available). If the problem is replicated, this would likely indicate a problem with your PC that you’ll need to diagnose further.

Likewise, if your main monitor stops working, but a spare works fine, then this could indicate a problem with your monitor hardware. However, this does not necessarily rule out a further software issue. For instance, outdated drivers or incorrect display resolution could still cause this fault, so you’ll need to investigate further.

Replace Your Hardware

After thorough testing, if you’ve exhausted potential software fixes and any issues with your hardware can be replicated with other attached devices, then you’ll need to consider replacing your hardware.

For instance, a broken graphics card could stop any display output to your monitor, resulting in a no-input signal. If the drivers aren’t the problem, you would need to replace your graphics card.

Likewise, a broken monitor that doesn’t work with multiple devices isn’t going to fix itself. You should look at your repair options under warranty or, failing that, consider buying a new monitor.

This would also be a worthwhile decision if your monitor flickers or there’s a sign that the unit is starting to fail. This might be the case if your display takes a long time to switch on, for instance. 

Fixing PC Hardware Issues

When a monitor displays a no input signal error message, don’t panic. The steps above should help you troubleshoot the issue, but you may need to look at diagnosing your monitor or PC further to consider whether you’re due a replacement or repair under your device warranty.

Investing in the right PC hardware is essential—you don’t want to end up in the same situation a year or two into the future. Cheap isn’t always cost-effective, but make sure to consider your budget carefully before you rush to buy new PC components, or a new PC or monitor entirely.

Sours: https://helpdeskgeek.com/help-desk/6-troubleshooting-tips-when-your-pc-monitor-has-no-signal/

How to Fix HDMI No Signal Issue

If  you’re getting TV or monitor no signal issues when you connect them to your PC via HDMI ports, don’t worry. You’re not alone. Many users have reported this issue. You can fix it with one of the solutions in this article.

The No Signal message means that the TV or monitor isn’t getting any input  from the currently selected source. There are five solutions to try to fix the issue. You may not have to try them all. Just work your way down the list until you find the one that works for you.

  1. Switch the Input source
  2. Enable HDMI connection
  3. Update the chipset drivers and graphics drivers
  4. Try unplugging then plugging the power cable of the TV or monitor
  5. Disconnect all HDMI sources then reconnect them one at a time
  6. Try a factory reset on the TV/monitor

Solution 1: Switch the Input source

Press the Input or Source button on your Remote to switch the input source to the HDMI port. If you have more than one HDMI port, ensure to select the right HDMI port.


Solution 2: Enable the HDMI connection setting

If you want to connect your Android phone or tablet to the TV, make sure the HDMI connection setting is enabled on your device. To do it, go to Settings > Display Entries > HDMI connection.

If the HDMI connection setting is disabled, enable it. If you couldn’t find the setting, then move on and try the fixes below.

Solution 3: Update the chipset drivers and graphics drivers

The problem can be caused  by faulty chipset drivers and graphics drivers. Try to update the drivers and see if the problem resolves. If you don’t have the time, patience or computer skills to update drivers manually, you can do it automatically with Driver Easy.

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.

You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):

1) Download and install Driver Easy.

2) Run Driver Easy and click theScan Nowbutton. Driver Easy will then scan your computer and detect any problem drivers.

3) Click the Update button next to a flagged driver (the chipset driver or graphics driver) to automatically download the correct version of this driver, then you can manually install it (you can do this with the FREE version).

Or clickUpdate All to automatically download and install the correct version ofallthe drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).


Solution 4: Try unplugging then plugging the power cable of the TV or monitor

Try unplugging the power cable of the TV or monitor for a few seconds then plug it back in. This may work like a charm for you.


Solution 5: Disconnect all HDMI sources then reconnect them one at a time

If you have more than one HDMI source connected, this solution may work for you. If you have only one HDMI source connected, skip this solution.

Follow these steps:

1) Unplug all TV/monitor from the HDMI ports.

2) Unplug the power cable from the TV or monitor for about 10 minutes.

3) Plug the power cable back in the TV or monitor.

4) Plug one device to one HDMI port of your PC. 

5) Turn on the device. 

6) Repeat steps 4-5 for each device and HDMI port.


Solution 6: Try a factory reset on the TV/monitor

The final solution you can try is performing a factory reset on the TV/monitor.

Hope the solutions help you fix the HDMI no signal issue.

230

230 people found this helpful

Sours: https://www.drivereasy.com/knowledge/hdmi-no-signal-connection-issue-solved/
  1. The center square wikipedia
  2. Is up tv on sling
  3. Wedding dresses with long capes
  4. Common problems with kia sedona

HDMI Port Not Working [SOLVED]

Many computer users have reported problems with their HDMI port. They’re getting no image or sound coming out from their devices when they’re using that port. If you’re experiencing this problem, don’t worry. You’re not the only one… and you should be able to fix the problem quite easily using one of the solutions we’ve listed below. You don’t have to try them all; just work your way down the list until you find the one that works for you:

  1. Configure your computer display settings
  2. Update or reinstall your graphics driver
  3. Restart and reconnect your devices
  4. Troubleshoot hardware issues

Method 1: Configure your computer display settings

If you are using multiple monitors on your computer and you get an issue with your HDMI port, it might be happening because you’re using the wrong display setting. So it’s a good idea to check this setting on your computer and make sure you use the right settings to display your screen.

To check your computer display settings, press the Windows logo key and P on your keyboard at the same time. A list of display modes will appear.

The difference between each mode is as follows:

  • PC screen/Computer only — Only using the first monitor.
  • Duplicate — Displaying the same content on both monitors.
  • Extend — Using both monitors to display an extended desktop.
  • Second screen/Projector only — Only using the second monitor.

Experiment with each mode and select the option that is the best match for your needs. If your display settings are correct, you will be able to see images on the screen connected via HDMI.

Method 2: Update your graphics driver

You may experience problems with your HDMI port if you’re using an incorrect graphics driver or it’s out of date. You should try updating or reinstalling your graphics driver and see if this helps you resolve your problem.

There are two ways you can update your graphics driver:

Option 1 — Manually — You’ll need some computer skills and patience to update your driver this way, because you need to find exactly the right the driver online, download it and install it step by step.

OR

Option 2 — Automatically (Recommended) — This is the quickest and easiest option. It’s all done with just a couple of mouse clicks – easy even if you’re a computer newbie.

Option 1 – Download and install the driver manually

Your graphics adapter manufacturer keeps updating drivers. To get them, you need to go to its website, find the drivers corresponding with your specific flavor of Windows version (for example, Windows 32 bit) and download the driver manually.

Once you’ve downloaded the correct driver for your system, double-click on the downloaded file and follow the on-screen instructions to install the driver.

Option 2 – Automatically update the graphics driver

If you don’t have the time, patience or computer skills to update the graphics driver manually, you can do it automatically with Driver Easy.

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.

You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks:

1) Download and Install Driver Easy.

2) Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.

3)  Click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).

If you need assistance, please contact Driver Easy’s support team at [email protected].

Method 3: Restart and reconnect your devices

Sometimes restarting and reconnecting your devices is an effective method to get your HDMI port work again. Here’s what you need to do:

1) Disconnect all your HDMI cables from your ports.

2)Shut down all your devices (your computer, monitor and TV) completely and unplug their power cables (and battery if you are using a laptop).

3) Leave them for five minutes.

4) Plug the power cables (and the battery) back in.

5) Connect the HDMI cables back to your devices.

6) Power on the devices.

Now see if you can use your HDMI port.

Method 4: Troubleshoot hardware issues

If your HDMI connection is still not working, it’s likely there are hardware issues with your HDMI port, cable or your devices. In this case, there are a few things you need to do:

First, replace your HDMI cable with a new one. This will resolve any problems you might be experiencing due to your cable.

If changing the cable doesn’t work for you, try your HDMI connection with another TV or monitor or another computer. If there are problems with any of your devices, you should get them repaired or replaced.

291

291 people found this helpful

Sours: https://www.drivereasy.com/knowledge/hdmi-port-not-working-solved/
How to Fix Computer No Display or No Signal on Monitor

How To Fix HDMI Monitor Not Detected In Windows 10

One of the best ways to connect your computer to a monitor or TV is through HDMI cable as it takes care of both sound and picture quality. Generally, it is effortless to connect an external display source by just connecting the HDMI cable and selecting the right input/output source. However, there are situations when it does not work as easy as it sounds and you might face issues with HDMI monitor not detected in your Windows 10 PC.

There are a few troubleshooting steps that can be performed to fix the error of display not detected in Windows 10. But if your monitor or TV was working earlier and stopped displaying all of a sudden, then here are a few simple prerequisites that you should take care of:

  • Check if the cable is correctly inserted in PC at one end and the Monitor or TV at the other.
  • You can unplug the cable and switch end if both the ports on PC and Monitor are the same.
  • Please check if the ports and cable ends are not covered with dust.
  • Reboot your computer and monitor or TV.
  • Try a second HDMI cable or use this cable on a different TV to make sure that the cable is not faulty.

Also Read: How To Setup Dual Monitors On Windows 10

Best Fixes OnHow To Fix HDMI Monitor Not Detected In Windows 10

If these simple steps do not fix the issue of the monitor not detecting in Windows 10, then you can continue with the fixes mentioned below:

Method 1. Use The Detect Display Option To Connect Any HDMI Monitor Not Detected

Windows settings

Microsoft has inculcated a Detect Display which can be used to fix any display not detected in Windows 10. This comes in handy, especially when the monitor or TV is of an older make or model and cannot be detected by Plug N Play method. The steps for manual detection of a display device are:

Step 1: Open the Windows Settings Menu by pressing Windows + I and click on System.

Step 2: From the options on the left-hand pane, select Display.

Step 3: Scroll down till you locate the multiple displays section and then, click on the Detect button.

multiple displays

This is a simple method and has worked for many in cases of Windows 10 not detecting HDMI monitor.

Also Read: Fix: AOC USB Monitor Not Working On Windows 10

Method 2.Toggle Between Various Projection Options

Projection Options

Microsoft allows its users to project Windows 10 screen to many different displays with a variety of connectors like VGA, DVI, Mini DisplayPort and HDMI. This can be facilitated by pressing Windows + P shortcut keys on the keyboard and then choosing the right option.

The Project to Second Screen menu can also be brought by typing the keywords in the search box on the left bottom corner. Once you call upon the menu, you will receive the following options:

PC screen only: The first option is generally selected by default, and it is the option that must be selected to resolve any issues of HDMI monitor not detected in Windows 10.

Duplicate: This option replicates the content on all monitors connected.

Extend: This option allows the user to slip the desktop contents between two monitors.

Second screen only: This option is to cast the screen on second display device, mainly a projector. This can be the main reason for display not detected in Windows 10.

Make sure that the first option labelled as PC Screen only is selected so that the display does not reflect any other screens.

Also Read: 5 Best Free Monitor Calibration Software in 2020

Method 3. Update Drivers

Drivers play an essential role when it comes to establishing a connection between the hardware and the software. If you have missing, corrupted or outdated graphic drivers, then this can result in Windows 10 not detecting HDMI monitor. It is easy to update drivers by using the inbuilt driver updater tool:

Step 1: Press the Windows + R to open the Run box and type “devmgmt.msc” to open the Device Manager.

Run box

Step 2: In the new window, locate Display Adapters and make a right-click on your graphics card.

Step 3: From the contextual menu, choose Update Driver.

Update Driver

Step 4:  Choose “Search automatically for updated driver software”, and Windows will automatically search the updated driver for you.

driver software

If the Windows operating system is unable to find a driver for you, then you can consider using an alternative third-party driver update tool like Smart Driver Care for an automated and guaranteed process that would accomplish within a couple of clicks.

Also Read: How To Fix Color Monitor Problems In Windows OS

Method 4. Modify Graphic Control Properties

The last troubleshooting step to fix HDMI monitor not detecting is to change the graphic settings from the Graphic properties in your system.

Step 1: Make a right-click on any blank space on your desktop and click on Graphics Properties to open the Intel Graphics Control Panel.

Intel Graphics Control Panel

Step 2: Choose Display and click on OK.

Display

Step 3: Now search for Display section and click on Multiple displays under it.

multiple displays

Step 4: Click once on the Operating Mode drop-down button and look for your display name.

Note if you have an NVIDIA Graphics card, then download this tool for help with Windows 10 not detecting HDMI monitor. And if you are using AMD instead, then you can download the AMD tool to resolve any display not detected in Windows 10 issue.

Also Read: How to Choose A Gaming Monitor: Things to Keep In Mind

The Final Word On How To Fix HDMI Monitor Not Detected In Windows 10

It can get frustrating if you face display not detected in Windows 10 error and the above four methods can resolve your issue if it is caused by specific misconfigured settings only. For hardware issue, you will have to either replace the device or cables or consult a technician. As per troubleshooting forums, updating the drivers generally fixes a lot of issues in the computer.

For any queries or suggestions, please let us know in the comments section below. We would love to get back to you with a solution. We post regularly on the tips and tricks along with solutions to common issues related to technology.

Suggested Reading:

EIZO Monitor Not Turning On? Here’s How To Fix It!

Why Is Your Philips Monitor Not Working?

How to Fix: Acer Monitor Not Working

How To Fix Dell Monitor Not Working

Curved Monitor Vs Flat Monitor

Sours: https://wethegeek.com/how-to-fix-hdmi-monitor-not-detected-in-windows-10/

Detecting pc not hdmi monitor

How to Fix a No-Input Signal to a Computer

By Joshua Phillips

Computer monitor flicker is caused by a bad configuration or failing hardware.

When your business doesn't have an Information Technology department, it may fall on you to keep your computers running in the event of an error. If your monitor is displaying "No Input Signal," there is no image displayed from your PC to your monitor. There are several possible causes for this error. To fix it, you must determine which component is defective, ranging from the cables that attach your monitor to your PC to the monitor itself or even your PC's video card.

Unplug the cable running from your monitor to your PC and plug it back in, making sure the connection is firm. The most common cause of this error is a loose cable.

Reattach the cable running from your monitor to your PC. If the monitor is still not displaying a signal after firmly reattaching the cable, the problem could lie with the cable, especially if the cable has visible damage.

Replace your monitor with another monitor if possible. If the "No Input Signal" error still appears, the problem does not rest with the cables or the monitor, but with your PC.

Open your PC case and locate your video card. Remove the card and then replace it firmly in its slot or, if possible, insert the video card into another slot on your motherboard. A video card that is not making a firm connection will not display images to the monitor. Close your PC case and test the monitor again.

Replace your video card completely. Your video card may suffer from internal damage that is not allowing it to output a signal.

References

Tips

  • If you are still not receiving a signal even after replacing your video card, you may also need to replace the computer's power supply and, in a worst-case scenario, your computer's motherboard.
  • If your computer is still under warranty, arrange for an official repair before you open up your computer. Often, opening your computer yourself will void your warranty.

Warnings

  • Always ground yourself by touching a metal object before touching any component in your PC case. Failure to properly ground yourself can result in damaged components.

Writer Bio

Joshua Phillips has done it all when it comes to video games: strategy guides, previews, reviews, in-depth interviews with developers and extensive public relations work. He has written for websites such as Hardcore Gaming 101 and MyInsideGamer.

Sours: https://smallbusiness.chron.com/fix-noinput-signal-computer-58267.html
Pc is on but no monitor signal fix!

[Solved] Windows 10 Not Detecting HDMI TV

Many users have reported a problem saying Windows 10 is not detecting HDMI TV. Here are working solutions to fix this problem. But before you start trying out these solutions , please try two steps as given below:-

  1. Just Unplug your HDMI cable from your TV set and then plug it again.
  2. Try out a new and different HDMI Cable to see whether its a fault with your HDMI cable.
  3. Once you connect your Computer to TV via HDMI cable just make sure that you select correct HDMI port from your TV remote . (Since most TV have multiple HDMI port named HDMI1, HDMI2 etc.)

Fix 1 – Select Duplicate screen from Intel HD graphics control panel

1. Right click on desktop anywhere.
2. Click on Graphics Properties

 

Graphic Prperties

3. Click on Display
4. Select Multiple Displays

 

Intel Hd Graphics Min (1)

5. Click Detect And / Or Select Duplicate screen

Fix 2 – Check that Your Display Output is working fine or Not

1- Do a right Click on your desktop anywhere on empty space.

2 -In the context menu which appears, just click on personalize.

 

Personalize

3 – Check that you are able to see TV as a second monitor or not. You can also click on detect to determine the screens.

 

Second Monior

 

If you are not able to see TV as second monitor. Try the steps as shown.

1 – Press Windows logo key  + p together.

2 – Click on Duplicate to choose Duplicate.

 

Duplicate Screen Windows 10

 

3 – If it does not work, Click on Extend to choose Extend.

Check if your Windows 10 PC is detecting HDMI or not.

Fix 3 – Restart PC with HDMI cable attached and TV being on

1- Make sure that your HDMI cable is attached and Your TV is turned on.

2 – Now, Restart your computer.

Fix 4 – Update your Intel Graphics driver

1 – Press Windows key + r.

2 – Write devmgmt.msc and press Enter key.

3 – Now, once the Device manager opens up, just click on display adaptor to expand it.

4 – Now, right click on Intel Graphics driver and update driver.

Update Driver Software

 

Fix 5 – Troubleshoot Hardware devices.

1 – Go to settings.

2 -Now, click on Update & Security.

3 –  Click on troubleshoot from the left menu.

4 –  Click on Hardware & Devices from the right.

5 – Once it expands, click on run the troubleshooter.

 

Troubleshoot

 

 

Geek

Saurav is associated with IT industry and computers for more than a decade and is writing on The Geek Page on topics revolving on windows 10 and softwares.

Filed Under: Windows 10

Sours: https://thegeekpage.com/solved-windows-10-not-detecting-hdmi-tv/

Similar news:

How to Fix Windows 10 Won’t Recognize Second Monitor

“Second monitor not showing up Windows 10! I have recently purchased a second monitor and it is not being detected no matter how I plug it in. My Build is a Cyber Power PC, Windows 10. Any suggestions help and let me know if I can give more detail anywhere.”

I’ve seen people complaining that Windows 10 not detecting HDMI monitor a lot from tech forums. Some said the HDMI monitors display no signal while others reported it not working at all. The reasons for this issue can be HDMI port/cable or something wrong with the graphics driver. Luckily you can fix second monitor not displaying on Windows 10 with the easy tips below.

Way 1: Fix HDMI Monitor Not Working on Windows 10 from Display Output Settings

Way 2: Update Graphics Driver to Fix Windows 10 Does Not Recognize Second Monitor

Way 3: Use Hardware and Device Troubleshooter to Fix Monitor Not Detected by PC

Way 1: Fix HDMI Monitor Not Working on Windows 10 from Display Output Settings

Before you start, unplug the cable from the HDMI port and insert it again to make sure both the cable and port are working well. Then follow the steps to check if the “display output settings” is incorrect.

  • Right-click the desktop and select “Personalize”. Then choose “Display” from the lower left corner.

  • personalize display

  • Check if there’s a second monitor, if not, keep precede the following steps.

  • monitor

  • Press Windows key and “P” key at the same time, click “Duplicate”.

  • duplicate

  • If Duplicate not working, choose “Extend”. After that, the computer will be able to detect the HDMI monitor.

Way 2: Update Graphics Driver to Fix Windows 10 Does Not Recognize Second Monitor

Another major reason for Windows 10 won’t detect HDMI monitor is graphics driver issue. You can go to “Device Manager” to check the status of the display drive and update it.

Way 3: Use Hardware and Device Troubleshooter to Fix Monitor Not Detected by PC

If the second monitor still no sound/signal detected on Windows 10 computer after trying the methods above, use Hardware and Devices troubleshooter to fix this issue.

  • Press Windows and W keys together and then type “Troubleshooting” in the search box.
  • Hit “Enter” and click on “Troubleshooting” tab.

  • troubleshooting

  • Click on “view all” option on the upper left corner.

  • view all

  • Select the “Hardware and Devices” option from the list and click “Next” to run the troubleshooter.

  • hardware and devices

Tip: If you forgot the password or password not working on Windows 10 computer, you can try an easy password cracker called Windows Password Key, quickly create a password reset drive to access your PC freely.

Free Download

With the 3 easy methods introduced in this post, you must have learnt how to fix second monitor not detected on Windows 10 clearly. If you still have any questions or suggestions, contact us by commenting below.

Free DownloadBuy Now($29.95)
Related Articles
[Solved] Windows 10 Metered Connection is Missing, How to Fix?
How to Reset Your Forgotten Password in Windows 10
Cannot Type Password in Windows 10? Here’s the Fix?

comments powered by
Sours: https://www.4winkey.com/windows-10/windows-10-not-detecting-hdmi-monitor.html


5698 5699 5700 5701 5702